PartsTable
Technical Data Sheet
PartsTable / COMPONENT / RA19002
RA19002 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.281 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 1.000 INCHES NOMINAL IN, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.094 INCHES NOMINAL IN, loop_inside_diameter: 0.781 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-778-2775, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RA19002
NSN: 5340-00-778-2775
FSC: 5340
CAGE: 46717 — PETTIBONE LLC (USA)
SPECIFICATIONS
diameter0.281 INCHES NOMINAL IN
materialSTEEL BAND
overall_width1.000 INCHES NOMINAL IN
tongue_hole_typeROUND, UNTHREADED
material_thickness0.094 INCHES NOMINAL IN
loop_inside_diameter0.781 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.750 INCHES NOMINAL IN
NSN5340-00-778-2775
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: RA19002 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 0.781 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL: STEEL BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.750 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.094 INCHES NOMINAL IN
•
DIAMETER: 0.281 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER0.781 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIALSTEEL BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.094 INCHES NOMINAL IN
DIAMETER0.281 INCHES NOMINAL IN
OVERALL WIDTH1.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
14253Interchangeable
interchangeable cross-reference
interchangeable
16728Interchangeable
interchangeable cross-reference
interchangeable
865073-0060Interchangeable
interchangeable cross-reference
interchangeable
1450706Interchangeable
interchangeable cross-reference
interchangeable
34930Interchangeable
interchangeable cross-reference
interchangeable
A0425-MC4-ML4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy RA19002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RA19002?
RA19002 is a CLAMP,LOOP.
What parts can replace RA19002?
There are 13 known substitutes for RA19002: 14253, 16728, 865073-0060 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for RA19002?
RA19002 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-778-2775. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RA19002

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026