PartsTable
Technical Data Sheet
PartsTable / O-RING / RA17534A
RA17534A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, center_hole_diameter: 6.461 INCHES MINIMUM AND 6.507 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-939-9100, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RA17534A
NSN: 5331-00-939-9100
FSC: 5331 — O-RING
CAGE: 46717 — PETTIBONE LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
center_hole_diameter6.461 INCHES MINIMUM AND 6.507 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-939-9100
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: RA17534A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
•
CENTER HOLE DIAMETER: 6.461 INCHES MINIMUM AND 6.507 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
CENTER HOLE DIAMETER6.461 INCHES MINIMUM AND 6.507 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
73038Interchangeable
interchangeable cross-reference
interchangeable
X87600Interchangeable
interchangeable cross-reference
interchangeable
X87600 ITEM 38Interchangeable
interchangeable cross-reference
interchangeable
160-103845-003Interchangeable
interchangeable cross-reference
interchangeable
91701158Interchangeable
interchangeable cross-reference
interchangeable
1A23428Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy RA17534A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RA17534A?
RA17534A is a O-RING.
What parts can replace RA17534A?
There are 7 known substitutes for RA17534A: 73038, X87600, X87600 ITEM 38 and 4 more. Substitute compatibility should be verified for your specific system.
Is RA17534A still available?
RA17534A is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RA17534A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026