PartsTable
Technical Data Sheet
PartsTable / COMPONENT / RA134
RA134 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include seal_type: CONTACT, block_type: FIXED, bore_diameter: 1.7500 INCHES NOMINAL IN, seal_location: BOTH ENDS, alignment_type: SELF-ALIGNING, housing_length: 0.8661 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-4169, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RA134
NSN: 3110-00-120-4169
FSC: 3110
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
seal_typeCONTACT
block_typeFIXED
bore_diameter1.7500 INCHES NOMINAL IN
seal_locationBOTH ENDS
alignment_typeSELF-ALIGNING
housing_length0.8661 INCHES NOMINAL IN
overall_length1.2500 INCHES NOMINAL IN
shaft_end_typeOPEN
collar_locationONE END
housing_diameter5.8750 INCHES NOMINAL IN
special_featuresFOUR MOUNTING HOLES
features_providedGROUND ROLLING ELEMENT GROOVE
NSN3110-00-120-4169
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: RA134 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 1.1250 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER1.1250 INCHES NOMINAL IN
SPECIAL FEATURESROLLER TYPE: SOLID
OVERALL LENGTH1.2500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
50136-1Interchangeable
interchangeable cross-reference
interchangeable
50118-0712Interchangeable
interchangeable cross-reference
interchangeable
G36-39Interchangeable
interchangeable cross-reference
interchangeable
RA1 3/4Interchangeable
interchangeable cross-reference
interchangeable
933-20Interchangeable
interchangeable cross-reference
interchangeable
G02621Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy RA134?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RA134?
RA134 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E.
What parts can replace RA134?
There are 8 known substitutes for RA134: 50136-1, 50118-0712, G36-39 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for RA134?
RA134 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-4169. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RA134

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026