PartsTable
Technical Data Sheet
PartsTable / O-RING / RA12575-01
RA12575-01 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, center_hole_diameter: 10.832 INCHES MINIMUM AND 10.892 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-257-2732, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RA12575-01
NSN: 5331-01-257-2732
FSC: 5331 — O-RING
CAGE: 24664 — JONAL LABORATORIES INC (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
center_hole_diameter10.832 INCHES MINIMUM AND 10.892 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-01-257-2732
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: RA12575-01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
CENTER HOLE DIAMETER: 10.832 INCHES MINIMUM AND 10.892 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER FLUOROCARBON CLASS FPM
CENTER HOLE DIAMETER10.832 INCHES MINIMUM AND 10.892 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
110 1-5/16Interchangeable
interchangeable cross-reference
interchangeable
209Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-751 TYEInterchangeable
interchangeable cross-reference
interchangeable
25184Interchangeable
interchangeable cross-reference
interchangeable
21839DBInterchangeable
interchangeable cross-reference
interchangeable
2-890-43Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy RA12575-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RA12575-01?
RA12575-01 is a O-RING.
What parts can replace RA12575-01?
There are 11 known substitutes for RA12575-01: 110 1-5/16, 209, GGG-D-751 TYE and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for RA12575-01?
RA12575-01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-257-2732. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RA12575-01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026