PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R8K5
R8K5 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.5000 INCHES NOMINAL IN, overall_width: 0.2500 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-1454, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R8K5
NSN: 3110-00-198-1454
FSC: 3110
CAGE: 70854 — SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.5000 INCHES NOMINAL IN
overall_width0.2500 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter1.1250 INCHES NOMINAL IN
internal_fit-up_designationLOOSE
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.5
NSN3110-00-198-1454
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: R8K5 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 0.5000 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
MATERIAL: STEEL OVERALL
•
INTERNAL FIT-UP DESIGNATION: LOOSE
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
BORE DIAMETER0.5000 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.5
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
MATERIALSTEEL OVERALL
INTERNAL FIT-UP DESIGNATIONLOOSE
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
INTERNAL FIT-UP DESIGNATIONLOOSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
130292A8Interchangeable
interchangeable cross-reference
interchangeable
7400-1Interchangeable
interchangeable cross-reference
interchangeable
ER8Interchangeable
interchangeable cross-reference
interchangeable
R8Interchangeable
interchangeable cross-reference
interchangeable
R8ZJ5EInterchangeable
interchangeable cross-reference
interchangeable
R8XR5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy R8K5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R8K5?
R8K5 is a BEARING,BALL,ANNULAR.
What parts can replace R8K5?
There are 23 known substitutes for R8K5: 130292A8, 7400-1, ER8 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for R8K5?
R8K5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-1454. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R8K5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026