PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R807REVAIT9
R807REVAIT9 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,CAP is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, nut_style: CAP, nut_height: 1.000 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNF, special_features: WRENCHING HOLES ON OD FOR SPANNER WRENCH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-766-1023, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R807REVAIT9
NSN: 5310-00-766-1023
FSC: 5310
CAGE: 63857 — CIRCOR NAVAL SOLUTIONS LLC DBA WARREN PUMPS (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
nut_styleCAP
nut_height1.000 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
special_featuresWRENCHING HOLES ON OD FOR SPANNER WRENCH
thread_directionLEFT-HAND
nominal_thread_size0.500 INCHES IN
bearing_surface_typeFLAT
thread_quantity_per_inch20
NSN5310-00-766-1023
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: R807REVAIT9 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SURFACE TYPE: FLAT
•
THREAD SERIES: UNF
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
THREAD QUANTITY PER INCH: 20
•
THREAD CLASS: 2B
•
NUT STYLE: CAP
•
THREAD DIRECTION: LEFT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
BEARING SURFACE TYPEFLAT
THREAD SERIESUNF
SPECIAL FEATURESWRENCHING HOLES ON OD FOR SPANNER WRENCH
NOMINAL THREAD SIZE0.500 INCHES IN
THREAD QUANTITY PER INCH20
THREAD CLASS2B
NUT STYLECAP
THREAD DIRECTIONLEFT-HAND
MATERIALCOPPER ALLOY OVERALL
NUT HEIGHT1.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
G61Interchangeable
interchangeable cross-reference
interchangeable
SF-6Interchangeable
interchangeable cross-reference
interchangeable
43502Interchangeable
interchangeable cross-reference
interchangeable
MS15710-2Interchangeable
interchangeable cross-reference
interchangeable
389289Interchangeable
interchangeable cross-reference
interchangeable
N17556Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy R807REVAIT9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R807REVAIT9?
R807REVAIT9 is a NUT,PLAIN,CAP.
What parts can replace R807REVAIT9?
There are 9 known substitutes for R807REVAIT9: G61, SF-6, 43502 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for R807REVAIT9?
R807REVAIT9 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-766-1023. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R807REVAIT9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026