R801074S — ADJUSTER,SLACK,BRAKE

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

R801074S: ADJUSTER,SLACK,BRAKE.

The ADJUSTER,SLACK,BRAKE is a the manufacturer industrial component. Key specifications include shape: TAPERED, hole_diameter: 1.500 INCHES NOMINAL IN, minor_diameter: 6.00 INCHES NOMINAL IN, special_features: MATERIAL: FORGED STEEL CONSTRUCTION, torque_load_rating: 26000.0 INCH-POUNDS IN, lubrication_provision: FITTING. This part is cataloged in the U.S.

Government catalog under NSN 2530-01-441-7210, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

R801074S

NSN: 2530-01-441-7210
FSC: 2530 — Vehicular Brake, Steering, Axle, Wheel, and Track Components
CAGE: 3D6E9 — MERITOR INDUSTRIAL PRODUCTS, LLC (USA)

SPECIFICATIONS

shape	TAPERED
hole_diameter	1.500 INCHES NOMINAL IN
minor_diameter	6.00 INCHES NOMINAL IN
spline_quantity	1
special_features	MATERIAL: FORGED STEEL CONSTRUCTION
torque_load_rating	26000.0 INCH-POUNDS IN
lubrication_provision	FITTING
supplementary_features	ADAPTER 5/8-18 UNF; 1.5-28 SPLINE
end_item_identification	2330-01-372-5642
specification/standard_data	96906-DOD-STD-100 GOVERNMENT STANDARD
screw_thread_series_designator	UNF
part_name_assigned_by_controlling_agency	SLACK ADJUSTER
NSN	2530-01-441-7210

COMPONENT DIAGRAM

KEY FEATURES

•

TORQUE LOAD RATING: 26000.0 INCH-POUNDS IN

•

SUPPLEMENTARY FEATURES: ADAPTER 5/8-18 UNF; 1.5-28 SPLINE

•

SHAPE: TAPERED

•

SPLINE QUANTITY: 1

•

SPECIFICATION/STANDARD DATA: 96906-DOD-STD-100 GOVERNMENT STANDARD

•

SCREW THREAD SERIES DESIGNATOR: UNF

TECHNICAL CHARACTERISTICS

TORQUE LOAD RATING	26000.0 INCH-POUNDS IN
SUPPLEMENTARY FEATURES	ADAPTER 5/8-18 UNF; 1.5-28 SPLINE
SHAPE	TAPERED
SPLINE QUANTITY	1
SPECIFICATION/STANDARD DATA	96906-DOD-STD-100 GOVERNMENT STANDARD
SPECIAL FEATURES	MATERIAL: FORGED STEEL CONSTRUCTION
SCREW THREAD SERIES DESIGNATOR	UNF
PART NAME ASSIGNED BY CONTROLLING AGENCY	SLACK ADJUSTER
END ITEM IDENTIFICATION	2330-01-372-5642
MINOR DIAMETER	6.00 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 7

R803106Reference document

Same NSN cross-reference

Reference document — Secondary reference

R803112Reference document

Same NSN cross-reference

Reference document — Secondary reference

065175Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

R801074Reference document

Same NSN cross-reference

Reference document — Secondary reference

12377972Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

400-10212Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy R801074S?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is R801074S?

R801074S is a ADJUSTER,SLACK,BRAKE.

What parts can replace R801074S?

There are 7 known substitutes for R801074S: R803106, R803112, 065175 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for R801074S?

R801074S is cataloged in the U.S. Government catalog under NSN 2530-01-441-7210. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

R801074S — ADJUSTER,SLACK,BRAKE

Request a Quote — R801074S