PartsTable
Technical Data Sheet
Download PDF

R72855 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

R72855: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.156 INCHES NOMINAL IN, diameter: 0.4910 INCHES MINIMUM AND 0.4960 INCHES MAXIMUM IN, material: STEEL COMP 1017 OVERALL, head_style: FLAT CHAMFER, chamfer_length: 0.109 INCHES NOMINAL IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-265-9082, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R72855
NSN: 5315-01-265-9082
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 75160 — DEERE & CO (USA)
SPECIFICATIONS
height0.156 INCHES NOMINAL IN
diameter0.4910 INCHES MINIMUM AND 0.4960 INCHES MAXIMUM IN
materialSTEEL COMP 1017 OVERALL
head_styleFLAT CHAMFER
chamfer_length0.109 INCHES NOMINAL IN
style_designatorSTRAIGHT
features_providedCASEHARDENED
pin_chamfer_angle15.0 DEGREES NOMINAL
pin_head_diameter0.625 INCHES NOMINAL IN
under_head_length1.422 INCHES NOMINAL IN
first_hole_diameter0.141 INCHES NOMINAL IN
hole_arrangement_styleONE END DRILLED
NSN5315-01-265-9082
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: R72855 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.109 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 1.422 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.141 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.625 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.109 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH1.422 INCHES NOMINAL IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.141 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.625 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.4910 INCHES MINIMUM AND 0.4960 INCHES MAXIMUM IN
FEATURES PROVIDEDCASEHARDENED
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
T10187Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy R72855?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R72855?
R72855 is a PIN,STRAIGHT,HEADED.
What parts can replace R72855?
There is 1 known substitute for R72855: T10187. Substitute compatibility should be verified for your specific system.
What is the NSN for R72855?
R72855 is cataloged in the U.S. Government catalog under NSN 5315-01-265-9082. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R72855

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.