PartsTable
Technical Data Sheet
Download PDF

R6004 — CUTTER,MILLING,SHELL END

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

R6004: CUTTER,MILLING,SHELL END.

The CUTTER,MILLING,SHELL END is a the manufacturer industrial component. Key specifications include material: STEEL, face_width: 2.250 INCHES NOMINAL IN, tooth_type: INTEGRAL, outside_diameter: 6.000 INCHES NOMINAL IN, special_features: CAN HAVE 14 TO 16 TEETH, mounting_hole_diameter: 2.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3455-00-231-3531, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R6004
NSN: 3455-00-231-3531
NIINs: 002313531, 014633470
FSC: 3455 — Cutting Tools for Machine Tools
CAGE: 33689 — NIAGARA CUTTER INC (USA)
SPECIFICATIONS
materialSTEEL
face_width2.250 INCHES NOMINAL IN
tooth_typeINTEGRAL
outside_diameter6.000 INCHES NOMINAL IN
special_featuresCAN HAVE 14 TO 16 TEETH
mounting_hole_diameter2.000 INCHES NOMINAL IN
end_item_identificationCOMBI-OVEN/ST, FSCM 07695
cutting_side_designationRIGHT-HAND
specification/standard_data80204-B94.19 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN3455-00-231-3531
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CUTTER,MILLING,SHELL END TITLE COMPONENT PN R6004 MFR CUTTER,MILLING,SHELL E
KEY FEATURES
•
MOUNTING HOLE DIAMETER: 2.000 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 6.000 INCHES NOMINAL IN
•
TOOTH TYPE: INTEGRAL
•
SPECIFICATION/STANDARD DATA: 80204-B94.19 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
CUTTING SIDE DESIGNATION: RIGHT-HAND
•
MATERIAL: STEEL
•
FACE WIDTH: 2.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE DIAMETER2.000 INCHES NOMINAL IN
OUTSIDE DIAMETER6.000 INCHES NOMINAL IN
TOOTH TYPEINTEGRAL
SPECIFICATION/STANDARD DATA80204-B94.19 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SPECIAL FEATURESCAN HAVE 14 TO 16 TEETH
CUTTING SIDE DESIGNATIONRIGHT-HAND
MATERIALSTEEL
FACE WIDTH2.250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 10
B94.19 TABLE 19Reference document
Same NSN cross-reference
Reference document — Secondary reference
ASME B94.19Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
54138Reference document
Same NSN cross-reference
Reference document — Secondary reference
GGG-C-755Reference document
Same NSN cross-reference
Reference document — Secondary reference
24613Reference document
Same NSN cross-reference
Reference document — Secondary reference
42913Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy R6004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R6004?
R6004 is a CUTTER,MILLING,SHELL END.
What parts can replace R6004?
There are 10 known substitutes for R6004: B94.19 TABLE 19, ASME B94.19, 54138 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for R6004?
R6004 is cataloged in the U.S. Government catalog under NSN 3455-00-231-3531. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R6004

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.