PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R600-95
R600-95 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, hole_diameter: 0.046 INCHES NOMINAL IN, thread_length: 0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-622-9476, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R600-95
NSN: 5305-00-622-9476
FSC: 5305
CAGE: 56705 — DONALLCO INC (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
hole_diameter0.046 INCHES NOMINAL IN
hole_quantity1
thread_length0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.164 INCHES IN
NSN5305-00-622-9476
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: R600-95 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2A A
•
THREAD QUANTITY PER INCH: 32
•
HEAD HOLE CONFIGURATION STYLE: ROUND
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
HEAD STYLE: FILLISTER
•
MINIMUM TENSILE STRENGTH: 55 POUNDS PER SQUARE INCH LBS
•
THREAD DIRECTION: RIGHT-HAND
•
HOLE DIAMETER: 0.046 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2A A
THREAD QUANTITY PER INCH32
HEAD HOLE CONFIGURATION STYLEROUND
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HEAD STYLEFILLISTER
MINIMUM TENSILE STRENGTH55 POUNDS PER SQUARE INCH LBS
THREAD DIRECTIONRIGHT-HAND
HOLE DIAMETER0.046 INCHES NOMINAL IN
HEAD HEIGHT0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
DMS 88163BInterchangeable
interchangeable cross-reference
interchangeable
2274Interchangeable
interchangeable cross-reference
interchangeable
NRC2274Interchangeable
interchangeable cross-reference
interchangeable
T-244-MInterchangeable
interchangeable cross-reference
interchangeable
72-700476-1Interchangeable
interchangeable cross-reference
interchangeable
MS35431-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy R600-95?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R600-95?
R600-95 is a SCREW,MACHINE.
What parts can replace R600-95?
There are 33 known substitutes for R600-95: DMS 88163B, 2274, NRC2274 and 30 more. Substitute compatibility should be verified for your specific system.
Is R600-95 still available?
R600-95 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R600-95

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026