PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R6-3-25
R6-3-25 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The WHEEL ASSEMBLY,PNEUMATIC TIRE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, disk_type: DOUBLE, rim_style: CURVED BASE, bore_shape: STRAIGHT, design_form: DISK, design_type: DEMOUNTABLE RIM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-293-9302, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R6-3-25
NSN: 3110-00-293-9302
FSC: 3110
CAGE: 01425 — LOUIS ALLIS CO THE THIS COMPANY HAS GONE BANKRUPT AND HAS BEEN PURCHASED BY 3 COMPANIES (USA)
SPECIFICATIONS
materialSTEEL OVERALL
disk_typeDOUBLE
rim_styleCURVED BASE
bore_shapeSTRAIGHT
design_formDISK
design_typeDEMOUNTABLE RIM
groove_depth0.600 INCHES MINIMUM AND 0.670 INCHES MAXIMUM IN
bore_diameter30.00 MILLIMETERS NOMINAL MM
hole_locationLOCATED ON SIDE OF RIM
overall_width4.130 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
NSN3110-00-293-9302
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: R6-3-25 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LOAD DIRECTION: RADIAL
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LOAD DIRECTIONRADIAL
END ITEM IDENTIFICATIONLOGISTICS SUPPORT VESSEL (LSV)
INTERNAL FIT-UP DESIGNATIONSTANDARD
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
OVERALL WIDTH19.0 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
2974Interchangeable
interchangeable cross-reference
interchangeable
6207Interchangeable
interchangeable cross-reference
interchangeable
885C896P2Interchangeable
interchangeable cross-reference
interchangeable
JMC6525Interchangeable
interchangeable cross-reference
interchangeable
6525Interchangeable
interchangeable cross-reference
interchangeable
L501FInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy R6-3-25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R6-3-25?
R6-3-25 is a WHEEL ASSEMBLY,PNEUMATIC TIRE.
What parts can replace R6-3-25?
There are 27 known substitutes for R6-3-25: 2974, 6207, 885C896P2 and 24 more. Substitute compatibility should be verified for your specific system.
Is R6-3-25 still available?
R6-3-25 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R6-3-25

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026