PartsTable
Technical Data Sheet
PartsTable / MRO / R5774

R5774 — Technical Data Sheet

✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The FUSE,CARTRIDGE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 5140 BALL, bore_diameter: 0.8200 INCHES NOMINAL IN, overall_width: 0.1875 INCHES NOMINAL IN, outside_diameter: 1.3040 INCHES NOMINAL IN, end_item_identification: STEAMER/OVEN COS56D, rolling_element_diameter: 0.1875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-183-9159, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ R5774
NSN: 3110-00-183-9159
FSC: 3110
CAGE: 43766 — SKF INDUSTRIES INC NICE BEARING PRODUCTS DIV (USA)
SPECIFICATIONS
materialSTEEL COMP 5140 BALL
bore_diameter0.8200 INCHES NOMINAL IN
overall_width0.1875 INCHES NOMINAL IN
outside_diameter1.3040 INCHES NOMINAL IN
end_item_identificationSTEAMER/OVEN COS56D
retainer_piece_quantity1
rolling_element_diameter0.1875 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
continuous_current_rating_in_amps0.020
NSN3110-00-183-9159
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: R5774 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.3040 INCHES NOMINAL IN
•
RETAINER PIECE QUANTITY: 1
•
BORE DIAMETER: 0.8200 INCHES NOMINAL IN
•
ROLLING ELEMENT DIAMETER: 0.1875 INCHES NOMINAL IN
•
RETAINER FABRICATION METHOD: PRESSED
•
MATERIAL: STEEL RETAINER
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.3040 INCHES NOMINAL IN
RETAINER PIECE QUANTITY1
BORE DIAMETER0.8200 INCHES NOMINAL IN
RETAINER PIECE QUANTITY1
ROLLING ELEMENT DIAMETER0.1875 INCHES NOMINAL IN
OVERALL WIDTH0.1875 INCHES NOMINAL IN
RETAINER FABRICATION METHODPRESSED
MATERIALSTEEL RETAINER
MATERIALSTEEL COMP 5140 BALL
MATERIALSTEEL COMP 5140 BALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
R7080Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy R5774?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R5774?
R5774 is a FUSE,CARTRIDGE. It is classified as a MRO (MRO_GENERAL).
What parts can replace R5774?
There is 1 known substitute for R5774: R7080. Substitute compatibility should be verified for your specific system.
What is the NSN for R5774?
R5774 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-183-9159. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R5774

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026