PartsTable
Technical Data Sheet
PartsTable / MRO / R562
R562 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY BUSHING, body_style: BUSHING MOUNTED LONG FRAME, body_width: 0.844 INCHES NOMINAL IN, body_height: 0.610 INCHES NOMINAL IN, body_length: 1.968 INCHES NOMINAL IN, terminal_type: TAB, SOLDER LUG. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-050-1593, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ R562
NSN: 5340-00-050-1593
FSC: 5340
CAGE: 76446 — MONARCH GOVERNOR CO (USA)
SPECIFICATIONS
materialCOPPER ALLOY BUSHING
body_styleBUSHING MOUNTED LONG FRAME
body_width0.844 INCHES NOMINAL IN
body_height0.610 INCHES NOMINAL IN
body_length1.968 INCHES NOMINAL IN
terminal_typeTAB, SOLDER LUG
inclosure_typeENCASED
overall_height0.812 INCHES NOMINAL IN
overall_length3.437 INCHES NOMINAL IN
terminal_length0.438 INCHES NOMINAL IN
style_designatorAXIAL TERMINAL (S)
surface_treatmentTIN TERMINAL
NSN5340-00-050-1593
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: R562 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
0295-000-000Upgraded Successor
successor cross-reference
successor
295Upgraded Successor
successor cross-reference
successor
AMS-QQ-A-200/11Interchangeable
interchangeable cross-reference
interchangeable
PA5352Interchangeable
interchangeable cross-reference
interchangeable
15427Interchangeable
interchangeable cross-reference
interchangeable
A-A-52420-15Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy R562?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R562?
R562 is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace R562?
There are 32 known substitutes for R562: 0295-000-000, 295, AMS-QQ-A-200/11 and 29 more. Substitute compatibility should be verified for your specific system.
Is R562 still available?
R562 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R562

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026