PartsTable
Technical Data Sheet
Download PDF

R53PC33 — SETSCREW

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

R53PC33: SETSCREW.

The SETSCREW is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 400 OR NICKEL ALLOY R-405 OVERALL, head_style: HEADLESS (SETSCREW), point_style: CONE, thread_class: 3A A, thread_length: 0.500 INCHES MAXIMUM IN, fastener_length: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-273-9361, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R53PC33
NSN: 5305-00-273-9361
FSC: 5305 — Screws
CAGE: 63857 — CIRCOR NAVAL SOLUTIONS LLC DBA WARREN PUMPS (USA)
SPECIFICATIONS
materialNICKEL ALLOY 400 OR NICKEL ALLOY R-405 OVERALL
head_styleHEADLESS (SETSCREW)
point_styleCONE
thread_class3A A
thread_length0.500 INCHES MAXIMUM IN
fastener_length0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
thread_quantity_per_inch24
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
nondefinitive_spec/std_data2 TYPE AND 2 STYLE
NSN5305-00-273-9361
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: R53PC33 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.500 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-281 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: HEADLESS (SETSCREW)
•
THREAD DIRECTION: RIGHT-HAND
•
POINT STYLE: CONE
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 2 STYLE
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
THREAD LENGTH0.500 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-281 FED SPEC ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEHEADLESS (SETSCREW)
THREAD DIRECTIONRIGHT-HAND
POINT STYLECONE
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 2 STYLE
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD CLASS3A A
SUBSTITUTES & CROSS-REFERENCES 3
MILS933TYPEFReference document
Same NSN cross-reference
Reference document — Secondary reference
FF-S-210 TYPE II STYLE 2Reference document
Same NSN cross-reference
Reference document — Identification reference
3017222Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy R53PC33?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R53PC33?
R53PC33 is a SETSCREW.
What parts can replace R53PC33?
There are 3 known substitutes for R53PC33: MILS933TYPEF, FF-S-210 TYPE II STYLE 2, 3017222. Substitute compatibility should be verified for your specific system.
What is the NSN for R53PC33?
R53PC33 is cataloged in the U.S. Government catalog under NSN 5305-00-273-9361. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R53PC33