PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R532
R532 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, shank_length: 0.062 INCHES NOMINAL IN, overall_length: 1.375 INCHES NOMINAL IN, shank_diameter: 0.0934 INCHES MINIMUM AND 0.0935 INCHES MAXIMUM IN, first_end_style: SQUARE, style_designator: SHOULDER. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-597-7916, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R532
NSN: 5315-00-597-7916
FSC: 5315
CAGE: 54978 — SIMPLEX TIME RECORDER LLC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
shank_length0.062 INCHES NOMINAL IN
overall_length1.375 INCHES NOMINAL IN
shank_diameter0.0934 INCHES MINIMUM AND 0.0935 INCHES MAXIMUM IN
first_end_styleSQUARE
style_designatorSHOULDER
shoulder_diameter0.125 INCHES NOMINAL IN
first_end_locationBOTH ENDS
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-597-7916
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: R532 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK LENGTH: 0.062 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
STYLE DESIGNATOR: SHOULDER
•
SHANK DIAMETER: 0.0934 INCHES MINIMUM AND 0.0935 INCHES MAXIMUM IN
•
FIRST END STYLE: SQUARE
•
SHOULDER DIAMETER: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SHANK LENGTH0.062 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL CORROSION RESISTING OVERALL
STYLE DESIGNATORSHOULDER
SHANK DIAMETER0.0934 INCHES MINIMUM AND 0.0935 INCHES MAXIMUM IN
FIRST END STYLESQUARE
OVERALL LENGTH1.375 INCHES NOMINAL IN
SHOULDER DIAMETER0.125 INCHES NOMINAL IN
FIRST END LOCATIONBOTH ENDS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
50472Interchangeable
interchangeable cross-reference
interchangeable
12809Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
18150Interchangeable
interchangeable cross-reference
interchangeable
104062Interchangeable
interchangeable cross-reference
interchangeable
3730745-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy R532?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R532?
R532 is a PIN,SHOULDER,HEADLESS.
What parts can replace R532?
There are 6 known substitutes for R532: 50472, 12809, 00044 and 3 more. Substitute compatibility should be verified for your specific system.
Is R532 still available?
R532 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R532

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026