PartsTable
Technical Data Sheet
Download PDF

R522PC14 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

R522PC14: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, rim_surface_width: 0.188 INCHES NOMINAL IN, peripheral_diameter: 2.719 INCHES MINIMUM AND 2.734 INCHES MAXIMUM IN, center_hole_diameter: 1.797 INCHES MINIMUM AND 1.813 INCHES MAXIMUM IN, cross-sectional_height: 0.625 INCHES NOMINAL IN, cross-sectional_thickness: 0.070 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-541-2420, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R522PC14
NSN: 5330-00-541-2420
FSC: 5330 — Packing and Gasket Materials
CAGE: 63857 — CIRCOR NAVAL SOLUTIONS LLC DBA WARREN PUMPS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
rim_surface_width0.188 INCHES NOMINAL IN
peripheral_diameter2.719 INCHES MINIMUM AND 2.734 INCHES MAXIMUM IN
center_hole_diameter1.797 INCHES MINIMUM AND 1.813 INCHES MAXIMUM IN
cross-sectional_height0.625 INCHES NOMINAL IN
cross-sectional_thickness0.070 INCHES NOMINAL IN
cross-sectional_shape_styleFLANGE
NSN5330-00-541-2420
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: R522PC14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.070 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.625 INCHES NOMINAL IN
•
RIM SURFACE WIDTH: 0.188 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: FLANGE
•
PERIPHERAL DIAMETER: 2.719 INCHES MINIMUM AND 2.734 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.797 INCHES MINIMUM AND 1.813 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.070 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.625 INCHES NOMINAL IN
RIM SURFACE WIDTH0.188 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLANGE
PERIPHERAL DIAMETER2.719 INCHES MINIMUM AND 2.734 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.797 INCHES MINIMUM AND 1.813 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
55-22049-64Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy R522PC14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R522PC14?
R522PC14 is a RETAINER,PACKING.
What parts can replace R522PC14?
There is 1 known substitute for R522PC14: 55-22049-64. Substitute compatibility should be verified for your specific system.
What is the NSN for R522PC14?
R522PC14 is cataloged in the U.S. Government catalog under NSN 5330-00-541-2420. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R522PC14