PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R50205CCA-8-0182
R50205CCA-8-0182 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 45.0 DEGREES SECOND END, seat_angle: 33.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE SECOND END, inside_diameter: 0.406 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-413-4060, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R50205CCA-8-0182
NSN: 4720-01-413-4060
FSC: 4720
CAGE: 50599 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV STRATOFLEX PRODUCT DIVISION (USA)
SPECIFICATIONS
flow_angle45.0 DEGREES SECOND END
seat_angle33.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
connection_typeTHREADED INTERNAL TUBE SECOND END
inside_diameter0.406 INCHES NOMINAL IN
connection_styleSWIVEL NUT WITH COMPRESSION SLEEVE FIRST END
outside_diameter0.562 INCHES NOMINAL IN
special_featuresINNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE
thread_directionRIGHT-HAND FIRST END
features_providedNUTS DRILLED FOR LOCKWIRE
operating_pressure1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
NSN4720-01-413-4060
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: R50205CCA-8-0182 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL JOINT FINE (UNJF) SECOND END
•
THREAD CLASS: 3B FIRST END
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
TEMP RATING: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
FEATURES PROVIDED: NUTS DRILLED FOR LOCKWIRE
•
INSIDE DIAMETER: 0.406 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) SECOND END
THREAD CLASS3B FIRST END
CROSS-SECTIONAL SHAPE STYLEROUND
THREAD DIRECTIONRIGHT-HAND FIRST END
TEMP RATING-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF
FEATURES PROVIDEDNUTS DRILLED FOR LOCKWIRE
INSIDE DIAMETER0.406 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND SECOND END
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
MINIMUM INSIDE BENDING RADIUS4.625 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
HG28MInterchangeable
interchangeable cross-reference
interchangeable
736-005463Interchangeable
interchangeable cross-reference
interchangeable
495-3000Interchangeable
interchangeable cross-reference
interchangeable
FS-925Interchangeable
interchangeable cross-reference
interchangeable
5077-1Interchangeable
interchangeable cross-reference
interchangeable
201861Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy R50205CCA-8-0182?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R50205CCA-8-0182?
R50205CCA-8-0182 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace R50205CCA-8-0182?
There are 7 known substitutes for R50205CCA-8-0182: HG28M, 736-005463, 495-3000 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for R50205CCA-8-0182?
R50205CCA-8-0182 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-413-4060. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R50205CCA-8-0182

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026