PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R50200CC-06-0142
R50200CC-06-0142 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.313 INCHES NOMINAL IN, connection_style: SWIVEL NUT FLARE FIRST END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-354-2676, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R50200CC-06-0142
NSN: 4720-01-354-2676
FSC: 4720
CAGE: 50599 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV STRATOFLEX PRODUCT DIVISION (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.313 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.469 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
features_providedNUTS DRILLED FOR LOCKWIRE AND REUSABLE END FITTINGS
operating_pressure1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure9000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.562 INCHES FIRST END IN
NSN4720-01-354-2676
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: R50200CC-06-0142 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER COVERING ENVIRONMENTAL PROTECTION: ACID RESISTANT AND MILDEW RESISTANT AND FUEL RESISTANT AND OIL RESISTANT AND SOLVENT RESISTANT AND VIBRATION RESISTANT
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
FEATURES PROVIDED: NUTS DRILLED FOR LOCKWIRE AND REUSABLE END FITTINGS
•
MINIMUM INSIDE BENDING RADIUS: 4.000 INCHES IN
•
THREAD SERIES DESIGNATOR: UNF FIRST END
•
SEAT ANGLE: 37.0 DEGREES FIRST END
•
INSIDE SURFACE CONDITION: SMOOTH
•
NOMINAL THREAD SIZE: 0.562 INCHES FIRST END IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTER COVERING ENVIRONMENTAL PROTECTIONACID RESISTANT AND MILDEW RESISTANT AND FUEL RESISTANT AND OIL RESISTANT AND SOLVENT RESISTANT AND VIBRATION RESISTANT
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
FEATURES PROVIDEDNUTS DRILLED FOR LOCKWIRE AND REUSABLE END FITTINGS
MINIMUM INSIDE BENDING RADIUS4.000 INCHES IN
THREAD SERIES DESIGNATORUNF FIRST END
SEAT ANGLE37.0 DEGREES FIRST END
INSIDE SURFACE CONDITIONSMOOTH
NOMINAL THREAD SIZE0.562 INCHES FIRST END IN
THREAD DIRECTIONRIGHT-HAND FIRST END
CONNECTION STYLESWIVEL NUT FLARE FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
S2554441-4-0100Interchangeable
interchangeable cross-reference
interchangeable
S377-4-0100Interchangeable
interchangeable cross-reference
interchangeable
S2554441Interchangeable
interchangeable cross-reference
interchangeable
S-377Interchangeable
interchangeable cross-reference
interchangeable
S2554441-8-0254Interchangeable
interchangeable cross-reference
interchangeable
L666000-8-0254Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy R50200CC-06-0142?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R50200CC-06-0142?
R50200CC-06-0142 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace R50200CC-06-0142?
There are 11 known substitutes for R50200CC-06-0142: S2554441-4-0100, S377-4-0100, S2554441 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for R50200CC-06-0142?
R50200CC-06-0142 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-354-2676. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R50200CC-06-0142

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026