PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R4AFF4
R4AFF4 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL SHIELD, bore_shape: STRAIGHT, bore_diameter: 0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, overall_width: 0.2762 INCHES MINIMUM AND 0.2812 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-555-4114, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R4AFF4
NSN: 3110-00-555-4114
FSC: 3110
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL SHIELD
bore_shapeSTRAIGHT
bore_diameter0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
overall_width0.2762 INCHES MINIMUM AND 0.2812 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0002 INCHES MINIMUM RADIAL AND 0.0006 INCHES MAXIMUM RADIAL IN
lubrication_materialGREASE
overall_outside_diameter0.7496 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
NSN3110-00-555-4114
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: R4AFF4 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SHIELD QUANTITY: 2
•
BORE SHAPE: STRAIGHT
•
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0006 INCHES MAXIMUM RADIAL IN
•
LUBRICATION MATERIAL: GREASE
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-3278 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SHIELD QUANTITY2
BORE SHAPESTRAIGHT
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0006 INCHES MAXIMUM RADIAL IN
LUBRICATION MATERIALGREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-3278 MIL SPEC SINGLE MATERIAL RESPONSE
LOAD DIRECTIONRADIAL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
16046Interchangeable
interchangeable cross-reference
interchangeable
0768-1029Interchangeable
interchangeable cross-reference
interchangeable
MS90728-123Interchangeable
interchangeable cross-reference
interchangeable
YA60-6Interchangeable
interchangeable cross-reference
interchangeable
7903Interchangeable
interchangeable cross-reference
interchangeable
A1430-60Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy R4AFF4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R4AFF4?
R4AFF4 is a BEARING,BALL,ANNULAR.
What parts can replace R4AFF4?
There are 28 known substitutes for R4AFF4: 16046, 0768-1029, MS90728-123 and 25 more. Substitute compatibility should be verified for your specific system.
What is the NSN for R4AFF4?
R4AFF4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-555-4114. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R4AFF4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026