PartsTable
Technical Data Sheet
Download PDF

R44111T10 — TEE,TUBE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

R44111T10: TEE,TUBE.

The TEE,TUBE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY OVERALL, flow_angle: 90.0 DEGREES, leg_length: 0.940 INCHES MINIMUM AND 0.990 INCHES MAXIMUM ALL ENDS IN, seat_angle: 37.0 DEGREES ALL ENDS, thread_class: 3A ALL ENDS A, connection_style: INVERTED FLARE (TUBE) ALL ENDS. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-004-4745, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R44111T10
NSN: 4730-00-004-4745
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 50599 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV STRATOFLEX PRODUCT DIVISION (USA)
SPECIFICATIONS
materialTITANIUM ALLOY OVERALL
flow_angle90.0 DEGREES
leg_length0.940 INCHES MINIMUM AND 0.990 INCHES MAXIMUM ALL ENDS IN
seat_angle37.0 DEGREES ALL ENDS
thread_class3A ALL ENDS A
connection_styleINVERTED FLARE (TUBE) ALL ENDS
operating_pressure3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size0.843 INCHES ALL ENDS IN
maximum_operating_temp135.0 CELSIUS SINGLE RESPONSE DEGC
end_item_identificationVARIOUS AIRCRAFT APPLICATION
thread_quantity_per_inch18 ALL ENDS
thread_series_designatorUNJS ALL ENDS
NSN4730-00-004-4745
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: R44111T10 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW ANGLE: 90.0 DEGREES
•
CONNECTION STYLE: INVERTED FLARE (TUBE) ALL ENDS
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 0.625 INCHES ALL ENDS IN
•
OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
LEG LENGTH: 0.940 INCHES MINIMUM AND 0.990 INCHES MAXIMUM ALL ENDS IN
•
NOMINAL THREAD SIZE: 0.843 INCHES ALL ENDS IN
•
SEAT ANGLE: 37.0 DEGREES ALL ENDS
•
MAXIMUM OPERATING TEMP: 135.0 CELSIUS SINGLE RESPONSE DEGC
TECHNICAL CHARACTERISTICS
FLOW ANGLE90.0 DEGREES
CONNECTION STYLEINVERTED FLARE (TUBE) ALL ENDS
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.625 INCHES ALL ENDS IN
OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
LEG LENGTH0.940 INCHES MINIMUM AND 0.990 INCHES MAXIMUM ALL ENDS IN
NOMINAL THREAD SIZE0.843 INCHES ALL ENDS IN
SEAT ANGLE37.0 DEGREES ALL ENDS
MAXIMUM OPERATING TEMP135.0 CELSIUS SINGLE RESPONSE DEGC
THREAD CLASS3A ALL ENDS A
END ITEM IDENTIFICATIONVARIOUS AIRCRAFT APPLICATION
SUBSTITUTES & CROSS-REFERENCES 2
ST7M217Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
GT515AL10Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy R44111T10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R44111T10?
R44111T10 is a TEE,TUBE.
What parts can replace R44111T10?
There are 2 known substitutes for R44111T10: ST7M217, GT515AL10. Substitute compatibility should be verified for your specific system.
What is the NSN for R44111T10?
R44111T10 is cataloged in the U.S. Government catalog under NSN 4730-00-004-4745. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R44111T10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.