PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R41PK13
R41PK13 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.2500 INCHES NOMINAL IN, overall_width: 0.1960 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-876-4395, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R41PK13
NSN: 3110-00-876-4395
FSC: 3110
CAGE: 83086 — NEW HAMPSHIRE BALL BEARINGS INC DIV HITECH DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.2500 INCHES NOMINAL IN
overall_width0.1960 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity1
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0001 INCHES MINIMUM RADIAL AND 0.0003 INCHES MAXIMUM RADIAL IN
lubrication_materialGREASE
overall_outside_diameter0.6250 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
NSN3110-00-876-4395
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: R41PK13 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
LUBRICATION MATERIAL: GREASE
•
SHIELD QUANTITY: 1
•
INTERNAL CLEARANCE: 0.0001 INCHES MINIMUM RADIAL AND 0.0003 INCHES MAXIMUM RADIAL IN
•
BORE SHAPE: STRAIGHT
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-3278 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONABEC NO.1
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
LUBRICATION MATERIALGREASE
SHIELD QUANTITY1
INTERNAL CLEARANCE0.0001 INCHES MINIMUM RADIAL AND 0.0003 INCHES MAXIMUM RADIAL IN
BORE SHAPESTRAIGHT
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-3278 MIL SPEC SINGLE MATERIAL RESPONSE
LOAD DIRECTIONRADIAL
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
C5016Interchangeable
interchangeable cross-reference
interchangeable
C5016-3Interchangeable
interchangeable cross-reference
interchangeable
C5016-3M0D1Interchangeable
interchangeable cross-reference
interchangeable
7R4MRIEFInterchangeable
Same NIIN cross-reference
interchangeable
FF-B-171Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy R41PK13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R41PK13?
R41PK13 is a BEARING,BALL,ANNULAR.
What parts can replace R41PK13?
There are 5 known substitutes for R41PK13: C5016, C5016-3, C5016-3M0D1 and 2 more. Substitute compatibility should be verified for your specific system.
Is R41PK13 still available?
R41PK13 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R41PK13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026