PartsTable
Technical Data Sheet
Download PDF

R411N — RUBBER SHEET,CELLULAR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

R411N: RUBBER SHEET,CELLULAR.

The RUBBER SHEET,CELLULAR is a the manufacturer industrial component. Key specifications include width: 0.250 INCHES NOMINAL IN, length: 0.500 INCHES NOMINAL IN, material: RUBBER SYNTHETIC CUSHIONING, thickness: 0.060 INCHES NOMINAL IN, temp_rating: -40.0 CELSIUS AND 70.0 CELSIUS DEGC, special_features: 20MM M163A2 MM. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-171-5338, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R411N
NSN: 5330-00-171-5338
NIINs: 001715338, 005852031, 008133659, 012093009, 015913080
FSC: 5330 — Packing and Gasket Materials
CAGE: 82942 — RBX INDUSTRIES (USA)
SPECIFICATIONS
width0.250 INCHES NOMINAL IN
length0.500 INCHES NOMINAL IN
materialRUBBER SYNTHETIC CUSHIONING
thickness0.060 INCHES NOMINAL IN
temp_rating-40.0 CELSIUS AND 70.0 CELSIUS DEGC
special_features20MM M163A2 MM
surface_conditionSMOOTH BOTH SIDES
fabrication_methodCELLULAR, UNEXPLODED
cross-sectional_width0.125 INCHES NOMINAL IN
cross-sectional_height0.500 INCHES NOMINAL IN
environmental_protectionOIL RESISTANT AND WEATHER RESISTANT
cross-sectional_shape_styleRECTANGULAR
NSN5330-00-171-5338
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: R411N MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 1.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 1.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
MATERIAL: RUBBER SYNTHETIC
•
FABRICATION METHOD: SOLID
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: AS DIFFERENTIATED BY DIMENSIONS
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT1.250 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH1.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
MATERIALRUBBER SYNTHETIC
FABRICATION METHODSOLID
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSAS DIFFERENTIATED BY DIMENSIONS
SUBSTITUTES & CROSS-REFERENCES 3
5330PL0796210Reference document
Same NSN cross-reference
Reference document — Informative reference only
R219NReference document
Same NSN cross-reference
Reference document — Secondary reference
SC2-41Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy R411N?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R411N?
R411N is a RUBBER SHEET,CELLULAR.
What parts can replace R411N?
There are 3 known substitutes for R411N: 5330PL0796210, R219N, SC2-41. Substitute compatibility should be verified for your specific system.
What is the NSN for R411N?
R411N is cataloged in the U.S. Government catalog under NSN 5330-00-171-5338. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R411N