PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R410P1
R410P1 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,SELF-LOCKING,PLATE is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 OVERALL, nut_style: PLATE, nut_height: 0.250 INCHES MAXIMUM IN, nut_length: 0.948 INCHES MAXIMUM IN, plate_width: 0.290 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN, temp_rating: 800.0 FAHRENHEIT NOMINAL DEGF. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-783-4174, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R410P1
NSN: 5310-00-783-4174
FSC: 5310
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialIRON ALLOY 660 OVERALL
nut_stylePLATE
nut_height0.250 INCHES MAXIMUM IN
nut_length0.948 INCHES MAXIMUM IN
plate_width0.290 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN
temp_rating800.0 FAHRENHEIT NOMINAL DEGF
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
hardness_rating49.0 ROCKWELL C MAXIMUM
locking_featurePREVAILING TORQUE ALL METAL DESIGN
plate_thickness0.032 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
NSN5310-00-783-4174
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: R410P1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE DIAMETER: 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
•
NUT STYLE: PLATE
•
FEATURES PROVIDED: FLOATING NUT
•
SURFACE TREATMENT: SILVER OVERALL
•
NUT LENGTH: 0.948 INCHES MAXIMUM IN
•
PLATE THICKNESS: 0.032 INCHES MAXIMUM IN
•
NUT MOUNTING PROVISION: STRAIGHT HOLES
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING HOLE DIAMETER0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
NUT STYLEPLATE
FEATURES PROVIDEDFLOATING NUT
SURFACE TREATMENTSILVER OVERALL
NUT LENGTH0.948 INCHES MAXIMUM IN
PLATE THICKNESS0.032 INCHES MAXIMUM IN
NUT MOUNTING PROVISIONSTRAIGHT HOLES
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
NOMINAL THREAD SIZE0.190 INCHES IN
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
1-012-1700Interchangeable
interchangeable cross-reference
interchangeable
5910001135689Interchangeable
interchangeable cross-reference
interchangeable
C0924Interchangeable
interchangeable cross-reference
interchangeable
137-0502Interchangeable
interchangeable cross-reference
interchangeable
MS21060-3Interchangeable
interchangeable cross-reference
interchangeable
938.42.31.135Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy R410P1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R410P1?
R410P1 is a NUT,SELF-LOCKING,PLATE.
What parts can replace R410P1?
There are 10 known substitutes for R410P1: 1-012-1700, 5910001135689, C0924 and 7 more. Substitute compatibility should be verified for your specific system.
Is R410P1 still available?
R410P1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R410P1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026