PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R3SSWX33K5VCC00-11
R3SSWX33K5VCC00-11 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 0.1875 INCHES NOMINAL IN, overall_width: 0.1960 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-686-1055, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R3SSWX33K5VCC00-11
NSN: 3110-00-686-1055
FSC: 3110
CAGE: 70854 — SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter0.1875 INCHES NOMINAL IN
overall_width0.1960 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
special_features0.5000 GM CM MAX STARTING TORQUE UNDER 400 GM THRUST LOAD
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
lubrication_materialOIL
calibration_designatorC11
NSN3110-00-686-1055
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: R3SSWX33K5VCC00-11 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.1875 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 0.5000 INCHES NOMINAL IN
•
CALIBRATION DESIGNATOR: C11
•
LOAD DIRECTION: RADIAL
•
SHIELD QUANTITY: 2
•
BORE SHAPE: STRAIGHT
•
SURFACE FINISH: GROUND
•
INTERNAL CLEARANCE: 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.1875 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.5000 INCHES NOMINAL IN
CALIBRATION DESIGNATORC11
LOAD DIRECTIONRADIAL
SHIELD QUANTITY2
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
INTERNAL CLEARANCE0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
STANDARD TOLERANCE DESIGNATIONABEC NO.7
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
SR143SSW011Interchangeable
interchangeable cross-reference
interchangeable
D841Interchangeable
interchangeable cross-reference
interchangeable
M81793-BEDEAA0SCB75AB1Interchangeable
interchangeable cross-reference
interchangeable
R3SSW5VCC00-11Interchangeable
Same NIIN cross-reference
interchangeable
R3SSWX423K5VCC0 O-11Interchangeable
Same NIIN cross-reference
interchangeable
M81793/02-HK4C5XXA1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy R3SSWX33K5VCC00-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R3SSWX33K5VCC00-11?
R3SSWX33K5VCC00-11 is a BEARING,BALL,ANNULAR.
What parts can replace R3SSWX33K5VCC00-11?
There are 10 known substitutes for R3SSWX33K5VCC00-11: SR143SSW011, D841, M81793-BEDEAA0SCB75AB1 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for R3SSWX33K5VCC00-11?
R3SSWX33K5VCC00-11 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-686-1055. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R3SSWX33K5VCC00-11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026