PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R3L
R3L ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include phase: THREE, material: STEEL SHIELD, bore_shape: STRAIGHT, power_unit: INCLUDED, current_type: AC, power_source: ELECTRIC MOTOR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6406, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R3L
NSN: 3110-00-155-6406
FSC: 3110
CAGE: 09136 — BAY CITY SHOVELS, INC (USA)
SPECIFICATIONS
phaseTHREE
materialSTEEL SHIELD
bore_shapeSTRAIGHT
power_unitINCLUDED
current_typeAC
power_sourceELECTRIC MOTOR
bore_diameter70.00 MILLIMETERS NOMINAL MM
mounting_typeFLOOR
overall_width35.0 MILLIMETERS NOMINAL MM
roll_diameter7.000 INCHES NOMINAL IN
working_width98.000 INCHES NOMINAL IN
load_directionRADIAL
NSN3110-00-155-6406
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: R3L · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
SHIELD QUANTITY: 2
•
SURFACE FINISH: GROUND
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LOAD DIRECTION: RADIAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LUBRICATION MATERIAL: GREASE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH35.0 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
SHIELD QUANTITY2
SURFACE FINISHGROUND
INTERNAL FIT-UP DESIGNATIONSTANDARD
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LUBRICATION MATERIALGREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALSTEEL INNER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
12085Interchangeable
interchangeable cross-reference
interchangeable
K5MInterchangeable
interchangeable cross-reference
interchangeable
R3LInterchangeable
interchangeable cross-reference
interchangeable
813820Interchangeable
interchangeable cross-reference
interchangeable
26-13-62Interchangeable
interchangeable cross-reference
interchangeable
0271C0006-62Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy R3L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R3L?
R3L is a BEARING,BALL,ANNULAR.
What parts can replace R3L?
There are 16 known substitutes for R3L: 12085, K5M, R3L and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for R3L?
R3L is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6406. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R3L

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026