PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R395
R395 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,CYLINDRICAL is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY, body_style: PLAIN, bore_shape: STRAIGHT, corner_shape: SQUARE ALL CORNERS, bore_diameter: 95.0 MILLIMETERS NOMINAL MM, overall_width: 45.0 MILLIMETERS NOMINAL MM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-7380, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R395
NSN: 3110-00-155-7380
FSC: 3110
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
materialCOPPER ALLOY
body_stylePLAIN
bore_shapeSTRAIGHT
corner_shapeSQUARE ALL CORNERS
bore_diameter95.0 MILLIMETERS NOMINAL MM
overall_width45.0 MILLIMETERS NOMINAL MM
overall_length0.438 INCHES NOMINAL IN
surface_finish125.0 MICROINCHES ALL SURFACES
connection_typeTHREADED EXTERNAL PIPE FIRST END
connection_stylePLAIN (PIPE) FIRST END
locating_featureNONLOCATING
special_featuresTAPPED HOLE ONLY 0.188 IN. DP IN
NSN3110-00-155-7380
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: R395 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
•
BORE DIAMETER: 95.0 MILLIMETERS NOMINAL MM
•
MATERIAL: STEEL ROLLER
•
OVERALL OUTSIDE DIAMETER: 200.0 MILLIMETERS NOMINAL MM
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
BORE DIAMETER95.0 MILLIMETERS NOMINAL MM
OVERALL WIDTH45.0 MILLIMETERS NOMINAL MM
MATERIALSTEEL ROLLER
MATERIALSTEEL INNER RING
MATERIALSTEEL OUTER RING
OVERALL OUTSIDE DIAMETER200.0 MILLIMETERS NOMINAL MM
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE SHAPESTRAIGHT
LOCATING FEATURENONLOCATING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
N305Interchangeable
interchangeable cross-reference
interchangeable
BU1305ZInterchangeable
interchangeable cross-reference
interchangeable
6001Interchangeable
interchangeable cross-reference
interchangeable
R330Interchangeable
interchangeable cross-reference
interchangeable
A-A-55602Interchangeable
interchangeable cross-reference
interchangeable
R135Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy R395?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R395?
R395 is a BEARING,ROLLER,CYLINDRICAL.
What parts can replace R395?
There are 31 known substitutes for R395: N305, BU1305Z, 6001 and 28 more. Substitute compatibility should be verified for your specific system.
What is the NSN for R395?
R395 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-7380. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R395

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026