R356P10C — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

R356P10C: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN, material: PLASTIC TETRAFLUOROETHYLENE CUSHION, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.050 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-520-2791, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

R356P10C

NSN: 5340-00-520-2791
FSC: 5340 — Hardware, Commercial
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)

SPECIFICATIONS

diameter	0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
material	PLASTIC TETRAFLUOROETHYLENE CUSHION
overall_width	0.500 INCHES NOMINAL IN
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.050 INCHES NOMINAL IN
loop_inside_diameter	0.625 INCHES NOMINAL IN
material_document_and_classification	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	0.983 INCHES MINIMUM AND 1.033 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole	0.765 INCHES MINIMUM AND 0.815 INCHES MAXIMUM IN
NSN	5340-00-520-2791

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.983 INCHES MINIMUM AND 1.033 INCHES MAXIMUM IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.765 INCHES MINIMUM AND 0.815 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.050 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.983 INCHES MINIMUM AND 1.033 INCHES MAXIMUM IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.765 INCHES MINIMUM AND 0.815 INCHES MAXIMUM IN
MATERIAL	STEEL COMP 321 BAND
MATERIAL	PLASTIC TETRAFLUOROETHYLENE CUSHION

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 3

5340PL0725164Reference document

Same NSN cross-reference

Reference document — Informative reference only

JP1256P10Reference document

Same NSN cross-reference

Reference document — Secondary reference

465SS10Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy R356P10C?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is R356P10C?

R356P10C is a CLAMP,LOOP.

What parts can replace R356P10C?

There are 3 known substitutes for R356P10C: 5340PL0725164, JP1256P10, 465SS10. Substitute compatibility should be verified for your specific system.

What is the NSN for R356P10C?

R356P10C is cataloged in the U.S. Government catalog under NSN 5340-00-520-2791. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

R356P10C — CLAMP,LOOP

Request a Quote — R356P10C