PartsTable
Technical Data Sheet
PartsTable / MRO / R335
R335 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include color: YELLOW, width: 3.000 INCHES NOMINAL IN, length: 3.000 INCHES NOMINAL IN, material: STEEL ROLLER, bore_shape: STANDARD TAPER, body_length: 0.562 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-7345, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ R335
NSN: 3110-00-155-7345
FSC: 3110
CAGE: 80038 — EQUITABLE BEARING CO INC (USA)
SPECIFICATIONS
colorYELLOW
width3.000 INCHES NOMINAL IN
length3.000 INCHES NOMINAL IN
materialSTEEL ROLLER
bore_shapeSTANDARD TAPER
body_length0.562 INCHES NOMINAL IN
body_diameter0.219 INCHES NOMINAL IN
bore_diameter35.00 MILLIMETERS NOMINAL MM
mounting_typeBASE
overall_width21.00 MILLIMETERS NOMINAL MM
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
terminal_typeWIRE LEAD
NSN3110-00-155-7345
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: R335 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 80.00 MILLIMETERS NOMINAL MM
•
STYLE DESIGNATOR: SINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
•
MATERIAL: STEEL ROLLER
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LOCATING FEATURE: NONLOCATING
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER80.00 MILLIMETERS NOMINAL MM
STYLE DESIGNATORSINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
MATERIALSTEEL ROLLER
MATERIALSTEEL INNER RING
MATERIALSTEEL OUTER RING
INTERNAL FIT-UP DESIGNATIONSTANDARD
LOCATING FEATURENONLOCATING
BORE SHAPESTANDARD TAPER
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
N305Interchangeable
interchangeable cross-reference
interchangeable
BU1305ZInterchangeable
interchangeable cross-reference
interchangeable
6001Interchangeable
interchangeable cross-reference
interchangeable
R330Interchangeable
interchangeable cross-reference
interchangeable
A-A-55602Interchangeable
interchangeable cross-reference
interchangeable
R135Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy R335?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R335?
R335 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace R335?
There are 33 known substitutes for R335: N305, BU1305Z, 6001 and 30 more. Substitute compatibility should be verified for your specific system.
What is the NSN for R335?
R335 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-7345. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R335

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026