PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R2SS4VG440-11-1
R2SS4VG440-11-1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.1248 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN, overall_width: 0.1512 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-959-4881, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R2SS4VG440-11-1
NSN: 3110-00-959-4881
FSC: 3110
CAGE: 70854 — SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.1248 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
overall_width0.1512 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialOIL
overall_outside_diameter0.3748 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
NSN3110-00-959-4881
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: R2SS4VG440-11-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
LUBRICATION MATERIAL: OIL
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.1512 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM IN
SURFACE FINISHGROUND
LUBRICATION MATERIALOIL
INTERNAL FIT-UP DESIGNATIONSTANDARD
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
STANDARD TOLERANCE DESIGNATIONABEC NO.5
LOAD DIRECTIONRADIAL
BORE SHAPESTRAIGHT
SHIELD QUANTITY2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
100019Interchangeable
interchangeable cross-reference
interchangeable
62480Interchangeable
interchangeable cross-reference
interchangeable
41008Interchangeable
interchangeable cross-reference
interchangeable
1-4GR100STN440Interchangeable
interchangeable cross-reference
interchangeable
1-4STAINLESSSTEELBALLGRADE1Interchangeable
interchangeable cross-reference
interchangeable
650864Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy R2SS4VG440-11-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R2SS4VG440-11-1?
R2SS4VG440-11-1 is a BEARING,BALL,ANNULAR.
What parts can replace R2SS4VG440-11-1?
There are 15 known substitutes for R2SS4VG440-11-1: 100019, 62480, 41008 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for R2SS4VG440-11-1?
R2SS4VG440-11-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-959-4881. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R2SS4VG440-11-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026