PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R27533R
R27533R ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The GROMMET,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, groove_width: 0.125 INCHES NOMINAL IN, grommet_style: ROUND, hole_diameter: 0.625 INCHES NOMINAL IN, overall_height: 0.438 INCHES NOMINAL IN, flange_thickness: 0.156 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-01-239-5975, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R27533R
NSN: 5325-01-239-5975
FSC: 5325
CAGE: 75160 — DEERE & CO (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
groove_width0.125 INCHES NOMINAL IN
grommet_styleROUND
hole_diameter0.625 INCHES NOMINAL IN
overall_height0.438 INCHES NOMINAL IN
flange_thickness0.156 INCHES NOMINAL IN
groove_outside_diameter1.250 INCHES NOMINAL IN
grommet_construction_typeSPLIT
large_flange_outside_diameter1.500 INCHES NOMINAL IN
material_document_and_classificationJDM H2 SC615,CAGEC 75160 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5325-01-239-5975
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: R27533R · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GROOVE OUTSIDE DIAMETER: 1.250 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.625 INCHES NOMINAL IN
•
GROOVE WIDTH: 0.125 INCHES NOMINAL IN
•
GROMMET CONSTRUCTION TYPE: SPLIT
•
LARGE FLANGE OUTSIDE DIAMETER: 1.500 INCHES NOMINAL IN
•
GROMMET STYLE: ROUND
•
FLANGE THICKNESS: 0.156 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
GROOVE OUTSIDE DIAMETER1.250 INCHES NOMINAL IN
HOLE DIAMETER0.625 INCHES NOMINAL IN
GROOVE WIDTH0.125 INCHES NOMINAL IN
GROMMET CONSTRUCTION TYPESPLIT
LARGE FLANGE OUTSIDE DIAMETER1.500 INCHES NOMINAL IN
GROMMET STYLEROUND
FLANGE THICKNESS0.156 INCHES NOMINAL IN
OVERALL HEIGHT0.438 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONJDM H2 SC615,CAGEC 75160 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MATERIALRUBBER SYNTHETIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
300-201Interchangeable
interchangeable cross-reference
interchangeable
247ASC1804-001Interchangeable
interchangeable cross-reference
interchangeable
R2753-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy R27533R?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R27533R?
R27533R is a GROMMET,NONMETALLIC.
What parts can replace R27533R?
There are 3 known substitutes for R27533R: 300-201, 247ASC1804-001, R2753-3. Substitute compatibility should be verified for your specific system.
What is the NSN for R27533R?
R27533R is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-01-239-5975. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R27533R

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026