PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R27366-4
R27366-4 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 45.0 DEGREES FIRST END, seat_angle: 12.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, exterior_color: NATURAL, connection_type: THREADED INTERNAL TUBE SECOND END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-182-9218, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R27366-4
NSN: 4720-00-182-9218
FSC: 4720
CAGE: 50599 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV STRATOFLEX PRODUCT DIVISION (USA)
SPECIFICATIONS
flow_angle45.0 DEGREES FIRST END
seat_angle12.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
exterior_colorNATURAL
connection_typeTHREADED INTERNAL TUBE SECOND END
inside_diameter0.852 INCHES MINIMUM IN
connection_styleSWIVEL NUT FLARE SECOND END
outside_diameter1.390 INCHES MAXIMUM IN
special_featuresINNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE
thread_directionRIGHT-HAND FIRST END
features_providedELECTROSTATIC DISCHARGE CAPABILITY
NSN4720-00-182-9218
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: R27366-4 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
FEATURES PROVIDED: ELECTROSTATIC DISCHARGE CAPABILITY
•
END FITTING COMPONENT AND MATERIAL: COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS
•
FITTING COMPONENT AND SURFACE TREATMENT: COMPLETE FITTING PASSIVATE FIRST END
•
OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
•
THREAD QUANTITY PER INCH: 12 SECOND END
•
END CONNECTION DESIGN: ELBOW SECOND END
TECHNICAL CHARACTERISTICS (FLIS)
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
FEATURES PROVIDEDELECTROSTATIC DISCHARGE CAPABILITY
END FITTING COMPONENT AND MATERIALCOMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS
FITTING COMPONENT AND SURFACE TREATMENTCOMPLETE FITTING PASSIVATE FIRST END
OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
THREAD QUANTITY PER INCH12 SECOND END
END CONNECTION DESIGNELBOW SECOND END
END CONNECTION DESIGNELBOW FIRST END
THREAD QUANTITY PER INCH12 FIRST END
FLOW ANGLE45.0 DEGREES FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
96-84-12Interchangeable
interchangeable cross-reference
interchangeable
85013-12Interchangeable
interchangeable cross-reference
interchangeable
218-42500-2Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy R27366-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R27366-4?
R27366-4 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace R27366-4?
There are 3 known substitutes for R27366-4: 96-84-12, 85013-12, 218-42500-2. Substitute compatibility should be verified for your specific system.
What is the NSN for R27366-4?
R27366-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-182-9218. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R27366-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026