PartsTable
Technical Data Sheet
Download PDF

R2575 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

R2575: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_width: 2.750 INCHES NOMINAL IN, body_height: 2.500 INCHES NOMINAL IN, body_length: 1.312 INCHES NOMINAL IN, flat_height: 0.219 INCHES NOMINAL IN, shaft_style: ROUND, FLATTED. This part is cataloged in the U.S.

Government catalog under NSN 5950-00-071-7733, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ R2575
NSN: 5950-00-071-7733
NIINs: 000717733, 009332220
FSC: 5950 — Coils and Transformers
CAGE: 88136 — TROMBETTA CORPORATION (USA)
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_width2.750 INCHES NOMINAL IN
body_height2.500 INCHES NOMINAL IN
body_length1.312 INCHES NOMINAL IN
flat_height0.219 INCHES NOMINAL IN
shaft_styleROUND, FLATTED
shaft_length0.875 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter1.562 INCHES NOMINAL IN
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
inclosure_typeFULLY INCLOSED
overall_length1.995 INCHES NOMINAL IN
NSN5950-00-071-7733
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN R2575 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 4 SINGLE GROUP
•
INCLOSURE TYPE: FULLY INCLOSED
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 2.500 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP IN
•
MOUNTING METHOD: UNTHREADED HOLE(S) SINGLE GROUP
•
BODY WIDTH: 2.750 INCHES NOMINAL IN
•
BODY HEIGHT: 2.500 INCHES NOMINAL IN
•
MOUNTING HOLE DIAMETER: 0.156 INCHES NOMINAL SINGLE GROUP IN
•
BODY LENGTH: 3.812 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY4 SINGLE GROUP
INCLOSURE TYPEFULLY INCLOSED
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH2.500 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP IN
MOUNTING METHODUNTHREADED HOLE(S) SINGLE GROUP
BODY WIDTH2.750 INCHES NOMINAL IN
BODY HEIGHT2.500 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.156 INCHES NOMINAL SINGLE GROUP IN
BODY LENGTH3.812 INCHES NOMINAL IN
RATING METHODELECTRICAL SINGLE COMPONENT SINGLE WINDING
DC RESISTANCE RATING IN OHMS0.980 SINGLE COMPONENT SINGLE WINDING
SUBSTITUTES & CROSS-REFERENCES 1
R02575Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy R2575?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R2575?
R2575 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace R2575?
There is 1 known substitute for R2575: R02575. Substitute compatibility should be verified for your specific system.
What is the NSN for R2575?
R2575 is cataloged in the U.S. Government catalog under NSN 5950-00-071-7733. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R2575

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.