PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R224140-8
R224140-8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include color: BLACK, material: STEEL CASE, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-286-6868, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R224140-8
NSN: 5330-00-286-6868
FSC: 5330
CAGE: 79793 — WOLVERINE MOTOR WORKS INC (USA)
SPECIFICATIONS
colorBLACK
materialSTEEL CASE
case_styleSQUARE
seal_width0.500 INCHES NOMINAL IN
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
hardness_rating80.0 SHORE DUROMETER A NOMINAL OVERALL
housing_bore_diameter2.374 INCHES NOMINAL IN
sealing_element_styleANGULAR
maximum_pressure_rating7.0 POUNDS PER SQUARE INCH (PSI) LBS
accommodated_shaft_diameter1.625 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3000 FEET PER MINUTE FT
NSN5330-00-286-6868
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: R224140-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 1.625 INCHES NOMINAL IN
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
COLOR: BLACK
•
HOUSING BORE DIAMETER: 2.374 INCHES NOMINAL IN
•
MAXIMUM PRESSURE RATING: 7.0 POUNDS PER SQUARE INCH (PSI) LBS
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER1.625 INCHES NOMINAL IN
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
CASE STYLESQUARE
SEAL WIDTH0.500 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
COLORBLACK
HOUSING BORE DIAMETER2.374 INCHES NOMINAL IN
MAXIMUM PRESSURE RATING7.0 POUNDS PER SQUARE INCH (PSI) LBS
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
MATERIALSTEEL CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
5841Interchangeable
interchangeable cross-reference
interchangeable
509Interchangeable
interchangeable cross-reference
interchangeable
35-1009-SW-02B-XFW-0/5000LBInterchangeable
interchangeable cross-reference
interchangeable
644Interchangeable
interchangeable cross-reference
interchangeable
X5091Interchangeable
interchangeable cross-reference
interchangeable
16769Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy R224140-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R224140-8?
R224140-8 is a SEAL,PLAIN ENCASED.
What parts can replace R224140-8?
There are 32 known substitutes for R224140-8: 5841, 509, 35-1009-SW-02B-XFW-0/5000LB and 29 more. Substitute compatibility should be verified for your specific system.
Is R224140-8 still available?
R224140-8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R224140-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026