PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R216-132-8
R216-132-8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, housing_bore_diameter: 2.250 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-179-0855, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R216-132-8
NSN: 5330-00-179-0855
FSC: 5330
CAGE: 96879 — TROSTEL ALBERT PACKING LTD (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.500 INCHES NOMINAL IN
housing_bore_diameter2.250 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.500 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3000 FEET PER MINUTE FT
NSN5330-00-179-0855
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: R216-132-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.250 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
ACCOMMODATED SHAFT DIAMETER: 1.500 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.500 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.250 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER1.500 INCHES NOMINAL IN
CASE STYLESQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
SEALING ELEMENT STYLEANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
116225Interchangeable
interchangeable cross-reference
interchangeable
583Z4292Interchangeable
interchangeable cross-reference
interchangeable
S905Interchangeable
interchangeable cross-reference
interchangeable
15X263Interchangeable
interchangeable cross-reference
interchangeable
7-990821Interchangeable
interchangeable cross-reference
interchangeable
000-229-1842Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy R216-132-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R216-132-8?
R216-132-8 is a SEAL,PLAIN ENCASED.
What parts can replace R216-132-8?
There are 10 known substitutes for R216-132-8: 116225, 583Z4292, S905 and 7 more. Substitute compatibility should be verified for your specific system.
Is R216-132-8 still available?
R216-132-8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R216-132-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026