PartsTable
Technical Data Sheet
Download PDF

R21162 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

R21162: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1015 OR STEEL COMP 1030 OR STEEL COMP 1010 OR STEEL COMP 1212 OVERALL, nut_style: HEXAGON, nut_height: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-737-1106, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R21162
NSN: 5310-00-737-1106
FSC: 5310 — Nuts and Washers
CAGE: 83120 — PRESSED METALS OF AMERICA INC (USA)
SPECIFICATIONS
materialSTEEL COMP 1015 OR STEEL COMP 1030 OR STEEL COMP 1010 OR STEEL COMP 1212 OVERALL
nut_styleHEXAGON
nut_height0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
thread_class3B
thread_seriesUN
thread_directionRIGHT-HAND
width_across_flats1.994 INCHES MINIMUM AND 2.063 INCHES MAXIMUM IN
nominal_thread_size1.625 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
bearing_surface_finish125.0 MICROINCHES
thread_quantity_per_inch16
material_document_and_classificationAISI FED STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-737-1106
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: R21162 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.994 INCHES MINIMUM AND 2.063 INCHES MAXIMUM IN
•
BEARING SURFACE FINISH: 125.0 MICROINCHES
•
THREAD SERIES: UN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI FED STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.625 INCHES IN
•
NUT HEIGHT: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.994 INCHES MINIMUM AND 2.063 INCHES MAXIMUM IN
BEARING SURFACE FINISH125.0 MICROINCHES
THREAD SERIESUN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI FED STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.625 INCHES IN
NUT HEIGHT0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD CLASS3B
THREAD QUANTITY PER INCH16
SUBSTITUTES & CROSS-REFERENCES 8
73-1346Reference document
Same NSN cross-reference
Reference document — Secondary reference
GP4252Reference document
Same NSN cross-reference
Reference document — Secondary reference
3733Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
A866Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
37373Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7371106Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy R21162?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R21162?
R21162 is a NUT,PLAIN,HEXAGON.
What parts can replace R21162?
There are 8 known substitutes for R21162: 73-1346, GP4252, 3733 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for R21162?
R21162 is cataloged in the U.S. Government catalog under NSN 5310-00-737-1106. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R21162