R2-10306-10 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

R2-10306-10: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 2.688 INCHES MAXIMUM IN, shaft_style: ROUND, pilot_length: 0.04700 INCHES NOMINAL IN, shaft_length: 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN, shaft_runout: 0.001 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-787-8665, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ R2-10306-10

NSN: 5905-00-787-8665
FSC: 5905 — Resistor
CAGE: 10112 — GENERAL DYNAMICS MOTION CONTROL LLC (USA)

SPECIFICATIONS

body_style	CYLINDRICAL SERVO MOUNTED
body_length	2.688 INCHES MAXIMUM IN
shaft_style	ROUND
pilot_length	0.04700 INCHES NOMINAL IN
shaft_length	0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
shaft_runout	0.001 INCHES IN
actuator_type	SINGLE SHAFT
body_diameter	2.995 INCHES MINIMUM AND 3.005 INCHES MAXIMUM IN
lateral_runout	0.002 INCHES IN
overall_length	3.422 INCHES MINIMUM AND 3.453 INCHES MAXIMUM IN
pilot_diameter	2.87450 INCHES MINIMUM AND 2.87550 INCHES MAXIMUM IN
shaft_diameter	0.250 INCHES NOMINAL IN
NSN	5905-00-787-8665

COMPONENT DIAGRAM

KEY FEATURES

•

BODY DIAMETER: 2.995 INCHES MINIMUM AND 3.005 INCHES MAXIMUM IN

•

LATERAL RUNOUT: 0.002 INCHES IN

•

ELECTRICAL RESISTANCE PER SECTION: 20.000 KILOHMS 2ND SECTION AND 50.000 KILOHMS 1ST SECTION

•

MOUNTING LIP DEPTH: 0.08800 INCHES MINIMUM AND 0.09800 INCHES MAXIMUM IN

•

UNDERCUT WIDTH: 0.07500 INCHES MINIMUM AND 0.08500 INCHES MAXIMUM IN

•

SECTION QUANTITY: 2

•

SHAFT DIAMETER: 0.250 INCHES NOMINAL IN

•

UNDERCUT DIAMETER: 2.87450 INCHES MINIMUM AND 2.87550 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

BODY DIAMETER	2.995 INCHES MINIMUM AND 3.005 INCHES MAXIMUM IN
LATERAL RUNOUT	0.002 INCHES IN
ELECTRICAL RESISTANCE PER SECTION	20.000 KILOHMS 2ND SECTION AND 50.000 KILOHMS 1ST SECTION
MOUNTING LIP DEPTH	0.08800 INCHES MINIMUM AND 0.09800 INCHES MAXIMUM IN
UNDERCUT WIDTH	0.07500 INCHES MINIMUM AND 0.08500 INCHES MAXIMUM IN
SECTION QUANTITY	2
SHAFT DIAMETER	0.250 INCHES NOMINAL IN
UNDERCUT DIAMETER	2.87450 INCHES MINIMUM AND 2.87550 INCHES MAXIMUM IN
FUNCTION CHARACTERISTIC PER SECTION	2ND SECTION 90 DEG SINE AND 1ST SECTION 90 DEG COSINE
BODY STYLE	CYLINDRICAL SERVO MOUNTED

OTHER ITEMS IN FSC 5905 — Resistor

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5905-00-000-0136 5905-00-000-0488 5905-00-000-8809 5905-00-000-8833 5905-00-000-9526 5905-00-001-1342 5905-00-001-1573 5905-00-001-2059

SUBSTITUTES & CROSS-REFERENCES 2

R2-103-6-10Reference document

Same NSN cross-reference

Reference document — Secondary reference

300FTS-117Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy R2-10306-10?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is R2-10306-10?

R2-10306-10 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).

What parts can replace R2-10306-10?

There are 2 known substitutes for R2-10306-10: R2-103-6-10, 300FTS-117. Substitute compatibility should be verified for your specific system.

What is the NSN for R2-10306-10?

R2-10306-10 is cataloged in the U.S. Government catalog under NSN 5905-00-787-8665. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

R2-10306-10 — RESISTOR,VARIABLE,NONWIRE WOUND,

Request a Quote — R2-10306-10