PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R17416
R17416 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.510 INCHES NOMINAL IN, material: STEEL BAND, slot_width: 0.510 INCHES NOMINAL IN, slot_length: 0.635 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: OBLONG AND ROUND, UNTHREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-181-5091, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R17416
NSN: 5340-01-181-5091
FSC: 5340
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
diameter0.510 INCHES NOMINAL IN
materialSTEEL BAND
slot_width0.510 INCHES NOMINAL IN
slot_length0.635 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeOBLONG AND ROUND, UNTHREADED
material_thickness0.031 INCHES NOMINAL IN
loop_inside_diameter1.250 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.937 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.312 INCHES NOMINAL IN
NSN5340-01-181-5091
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: R17416 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE HOLE TYPE: OBLONG AND ROUND, UNTHREADED
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 1.250 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.312 INCHES NOMINAL IN
•
DIAMETER: 0.510 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.937 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON CUSHION
•
SLOT WIDTH: 0.510 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
TONGUE HOLE TYPEOBLONG AND ROUND, UNTHREADED
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.250 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.312 INCHES NOMINAL IN
DIAMETER0.510 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.937 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON CUSHION
SLOT WIDTH0.510 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIALSTEEL BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
48Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy R17416?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R17416?
R17416 is a CLAMP,LOOP.
What parts can replace R17416?
There is 1 known substitute for R17416: 48. Substitute compatibility should be verified for your specific system.
What is the NSN for R17416?
R17416 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-181-5091. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R17416

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026