PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R16LL1L1
R16LL1L1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEAL, bore_shape: STRAIGHT, bore_diameter: 1.0000 INCHES NOMINAL IN, overall_width: 0.5000 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-259-0948, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R16LL1L1
NSN: 3110-00-259-0948
FSC: 3110
CAGE: 21760 — SCHATZ BEARING CORPORATION DBA SCHATZ BEARING CORP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEAL
bore_shapeSTRAIGHT
bore_diameter1.0000 INCHES NOMINAL IN
overall_width0.5000 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter2.0000 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
NSN3110-00-259-0948
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: R16LL1L1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC SEAL
•
BORE DIAMETER: 1.0000 INCHES NOMINAL IN
•
SEAL QUANTITY: 2
•
SURFACE FINISH: GROUND
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LUBRICATION MATERIAL: GREASE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC SEAL
MATERIALSTEEL COMP E52100 INNER RING
MATERIALSTEEL COMP E52100 OUTER RING
BORE DIAMETER1.0000 INCHES NOMINAL IN
SEAL QUANTITY2
SURFACE FINISHGROUND
INTERNAL FIT-UP DESIGNATIONSTANDARD
LUBRICATION MATERIALGREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
R16ZZInterchangeable
interchangeable cross-reference
interchangeable
GS03A42-24Interchangeable
interchangeable cross-reference
interchangeable
058-011Interchangeable
interchangeable cross-reference
interchangeable
81&21Interchangeable
interchangeable cross-reference
interchangeable
R16ZZZ20GRSInterchangeable
Same NIIN cross-reference
interchangeable
S10PP2Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy R16LL1L1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R16LL1L1?
R16LL1L1 is a BEARING,BALL,ANNULAR.
What parts can replace R16LL1L1?
There are 12 known substitutes for R16LL1L1: R16ZZ, GS03A42-24, 058-011 and 9 more. Substitute compatibility should be verified for your specific system.
Is R16LL1L1 still available?
R16LL1L1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R16LL1L1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026