PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R160E
R160E ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,CYLINDRICAL is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 60.00 MILLIMETERS NOMINAL MM, overall_width: 22.00 MILLIMETERS NOMINAL MM, surface_finish: GROUND, locating_feature: NONLOCATING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6520, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R160E
NSN: 3110-00-155-6520
FSC: 3110
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter60.00 MILLIMETERS NOMINAL MM
overall_width22.00 MILLIMETERS NOMINAL MM
surface_finishGROUND
locating_featureNONLOCATING
style_designatorSINGLE ROW, NON-LOCATING, CYLINDRICAL INNER RING, TWO LIP OUTER RING, SEPARABLE
overall_outside_diameter110.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationRBEC NO.1
NSN3110-00-155-6520
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: R160E · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: RBEC NO.1
•
BORE SHAPE: STRAIGHT
•
MATERIAL: STEEL OUTER RING
•
STYLE DESIGNATOR: SINGLE ROW, NON-LOCATING, CYLINDRICAL INNER RING, TWO LIP OUTER RING, SEPARABLE
•
LOCATING FEATURE: NONLOCATING
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
BORE SHAPESTRAIGHT
OVERALL WIDTH22.00 MILLIMETERS NOMINAL MM
MATERIALSTEEL OUTER RING
MATERIALSTEEL ROLLER
STYLE DESIGNATORSINGLE ROW, NON-LOCATING, CYLINDRICAL INNER RING, TWO LIP OUTER RING, SEPARABLE
MATERIALSTEEL INNER RING
LOCATING FEATURENONLOCATING
SURFACE FINISHGROUND
BORE DIAMETER60.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
3-0760Interchangeable
interchangeable cross-reference
interchangeable
150-613PCS760-761-762Interchangeable
interchangeable cross-reference
interchangeable
20760Interchangeable
interchangeable cross-reference
interchangeable
50619Interchangeable
interchangeable cross-reference
interchangeable
30760/VLBInterchangeable
interchangeable cross-reference
interchangeable
MUC212Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy R160E?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R160E?
R160E is a BEARING,ROLLER,CYLINDRICAL.
What parts can replace R160E?
There are 12 known substitutes for R160E: 3-0760, 150-613PCS760-761-762, 20760 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for R160E?
R160E is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6520. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R160E

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026