PartsTable
Technical Data Sheet
Download PDF

R160-6 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

R160-6: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE TUBE, bore_shape: STRAIGHT, temp_rating: -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF, bore_diameter: 0.5000 INCHES NOMINAL IN, overall_width: 10.0 MILLIMETERS NOMINAL MM, conductor_form: STRANDED ALL CONDUCTORS. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-482-2973, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ R160-6
NSN: 3110-00-482-2973
NIINs: 004822973, 006355020, 013874033
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 22202 — RANDOLPH CO (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE TUBE
bore_shapeSTRAIGHT
temp_rating-65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF
bore_diameter0.5000 INCHES NOMINAL IN
overall_width10.0 MILLIMETERS NOMINAL MM
seal_quantity2
conductor_formSTRANDED ALL CONDUCTORS
load_directionRADIAL
surface_finishGROUND
inside_diameter0.298 INCHES NOMINAL IN
outside_diameter0.490 INCHES NOMINAL IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
NSN3110-00-482-2973
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: R160-6 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 32.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH10.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER32.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SUBSTITUTES & CROSS-REFERENCES 4
465898-2RSUEReference document
Same NSN cross-reference
Reference document — Secondary reference
01-435-0093-5PC61TEReference document
Same NSN cross-reference
Reference document — Secondary reference
465898-2RSTEReference document
Same NSN cross-reference
Reference document — Secondary reference
465898-2RSJReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy R160-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R160-6?
R160-6 is a BEARING,BALL,ANNULAR. It is classified as a MRO (MRO_GENERAL).
What parts can replace R160-6?
There are 4 known substitutes for R160-6: 465898-2RSUE, 01-435-0093-5PC61TE, 465898-2RSTE and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for R160-6?
R160-6 is cataloged in the U.S. Government catalog under NSN 3110-00-482-2973. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R160-6