PartsTable
Technical Data Sheet
PartsTable / MRO / R1317
R1317 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include material: STEEL OVERALL, body_style: RECTANGULAR W/MOUNTING HOLES/SLOTS, body_width: 0.280 INCHES NOMINAL IN, bore_shape: STRAIGHT, body_height: 0.360 INCHES NOMINAL IN, body_length: 1.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-620-0365, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ R1317
NSN: 3110-00-620-0365
FSC: 3110
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleRECTANGULAR W/MOUNTING HOLES/SLOTS
body_width0.280 INCHES NOMINAL IN
bore_shapeSTRAIGHT
body_height0.360 INCHES NOMINAL IN
body_length1.000 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
shaft_length0.060 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
bore_diameter3.3465 INCHES NOMINAL IN
overall_width0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
overall_height0.535 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN
NSN3110-00-620-0365
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: R1317 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SMALLEST OUTSIDE DIAMETER: 4.2720 INCHES NOMINAL IN
•
BORE DIAMETER: 3.3465 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: INNER RING, ROLLER, SINGLE LIP
•
STANDARD TOLERANCE DESIGNATION: RBEC NO.1
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SMALLEST OUTSIDE DIAMETER4.2720 INCHES NOMINAL IN
BORE DIAMETER3.3465 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
STYLE DESIGNATORINNER RING, ROLLER, SINGLE LIP
OVERALL WIDTH1.6142 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
3067P1-501Interchangeable
interchangeable cross-reference
interchangeable
1N753AInterchangeable
interchangeable cross-reference
interchangeable
302-00-019AInterchangeable
interchangeable cross-reference
interchangeable
R-1-3-17Interchangeable
interchangeable cross-reference
interchangeable
114L15C153T70Interchangeable
interchangeable cross-reference
interchangeable
114L15C153T76Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy R1317?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R1317?
R1317 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace R1317?
There are 6 known substitutes for R1317: 3067P1-501, 1N753A, 302-00-019A and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for R1317?
R1317 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-620-0365. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R1317

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026