PartsTable
Technical Data Sheet
Download PDF

R127214PC77 — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

R127214PC77: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 1.8745 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN, overall_width: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, style_designator: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-183-9878, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R127214PC77
NSN: 3110-00-183-9878
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter1.8745 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN
overall_width0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
overall_outside_diameter2.4375 INCHES MINIMUM AND 2.4380 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
NSN3110-00-183-9878
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: R127214PC77 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
•
OVERALL OUTSIDE DIAMETER: 2.4375 INCHES MINIMUM AND 2.4380 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 1.8745 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
OVERALL WIDTH0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER2.4375 INCHES MINIMUM AND 2.4380 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
BORE DIAMETER1.8745 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
43860Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ST165Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy R127214PC77?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R127214PC77?
R127214PC77 is a BEARING,ROLLER,NEEDLE.
What parts can replace R127214PC77?
There are 2 known substitutes for R127214PC77: 43860, ST165. Substitute compatibility should be verified for your specific system.
What is the NSN for R127214PC77?
R127214PC77 is cataloged in the U.S. Government catalog under NSN 3110-00-183-9878. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R127214PC77