PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R11095
R11095 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, thickness: 0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM IN, hole_diameter: 0.781 INCHES NOMINAL IN, overall_diameter: 2.000 INCHES NOMINAL IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-291-4619, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R11095
NSN: 5310-00-291-4619
FSC: 5310
CAGE: 75160 — DEERE & CO (USA)
SPECIFICATIONS
materialCELLULOSE OVERALL
thickness0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM IN
hole_diameter0.781 INCHES NOMINAL IN
overall_diameter2.000 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationASTM D710 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-291-4619
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: R11095 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D710 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 2.000 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.781 INCHES NOMINAL IN
•
CENTER HOLE SHAPE STYLE: ROUND
•
MATERIAL: CELLULOSE OVERALL
•
THICKNESS: 0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D710 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
OVERALL DIAMETER2.000 INCHES NOMINAL IN
HOLE DIAMETER0.781 INCHES NOMINAL IN
CENTER HOLE SHAPE STYLEROUND
MATERIALCELLULOSE OVERALL
THICKNESS0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
40-11254-001Interchangeable
interchangeable cross-reference
interchangeable
11254Interchangeable
interchangeable cross-reference
interchangeable
RSA11254Interchangeable
interchangeable cross-reference
interchangeable
R11254Interchangeable
interchangeable cross-reference
interchangeable
VDLX0408000ACInterchangeable
interchangeable cross-reference
interchangeable
37-1018Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy R11095?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R11095?
R11095 is a WASHER,FLAT.
What parts can replace R11095?
There are 20 known substitutes for R11095: 40-11254-001, 11254, RSA11254 and 17 more. Substitute compatibility should be verified for your specific system.
Is R11095 still available?
R11095 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R11095

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026