PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R11017
R11017 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include height: 1.750 INCHES NOMINAL IN, material: COPPER ALLOY BODY, joint_type: SCARF-PERIPHERAL BOTTOM RING, inside_diameter: 2.500 INCHES NOMINAL IN, outside_diameter: 3.500 INCHES NOMINAL IN, end_item_identification: 2320-01-097-0260/5420-00-889-2020/ARMORED VEHICLE LAUNCH BRIDGE (M60A1 & M48A5). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-276-6021, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R11017
NSN: 5330-00-276-6021
FSC: 5330
CAGE: 23926 — KOMATSU AMERICA CORPORATION (USA)
SPECIFICATIONS
height1.750 INCHES NOMINAL IN
materialCOPPER ALLOY BODY
joint_typeSCARF-PERIPHERAL BOTTOM RING
inside_diameter2.500 INCHES NOMINAL IN
outside_diameter3.500 INCHES NOMINAL IN
end_item_identification2320-01-097-0260/5420-00-889-2020/ARMORED VEHICLE LAUNCH BRIDGE (M60A1 & M48A5)
intermediate_ring_quantity7
cross-sectional_shape_styleV BOTTOM RING
NSN5330-00-276-6021
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: R11017 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: V BOTTOM RING
•
MATERIAL: COTTON AND RUBBER SYNTHETIC TOP RING
•
OUTSIDE DIAMETER: 3.500 INCHES NOMINAL IN
•
INSIDE DIAMETER: 2.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEV BOTTOM RING
MATERIALCOTTON AND RUBBER SYNTHETIC TOP RING
OUTSIDE DIAMETER3.500 INCHES NOMINAL IN
INSIDE DIAMETER2.500 INCHES NOMINAL IN
MATERIALCOTTON OR RUBBER SYNTHETIC BOTTOM RING
CROSS-SECTIONAL SHAPE STYLEV TOP RING
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR INTERMEDIATE RING
MATERIALCOTTON AND RUBBER SYNTHETIC INTERMEDIATE RING
JOINT TYPESCARF-PERIPHERAL BOTTOM RING
HEIGHT1.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
FB0046-51N0DInterchangeable
interchangeable cross-reference
interchangeable
51N0DInterchangeable
interchangeable cross-reference
interchangeable
5238GX2Interchangeable
interchangeable cross-reference
interchangeable
14181Interchangeable
interchangeable cross-reference
interchangeable
B94.9Interchangeable
interchangeable cross-reference
interchangeable
B94.9 3/8-24 UNF HS G H1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy R11017?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R11017?
R11017 is a BEARING,SLEEVE.
What parts can replace R11017?
There are 22 known substitutes for R11017: FB0046-51N0D, 51N0D, 5238GX2 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for R11017?
R11017 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-276-6021. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R11017

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026