PartsTable
Technical Data Sheet
R1044-14 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, housing_bore_diameter: 2.373 INCHES MINIMUM AND 2.375 INCHES MAXIMUM IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.469 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-286-6839, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R1044-14
NSN: 5330-00-286-6839
FSC: 5330
CAGE: 01425 — LOUIS ALLIS CO THE THIS COMPANY HAS GONE BANKRUPT AND HAS BEEN PURCHASED BY 3 COMPANIES (USA)
SPECIFICATIONS
materialLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
housing_bore_diameter2.373 INCHES MINIMUM AND 2.375 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.469 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed1600 FEET PER MINUTE FT
NSN5330-00-286-6839
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: R1044-14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SEAL WIDTH: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER: 1.469 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1600 FEET PER MINUTE FT
HOUSING BORE DIAMETER: 2.373 INCHES MINIMUM AND 2.375 INCHES MAXIMUM IN
CASE STYLE: SQUARE
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER1.469 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1600 FEET PER MINUTE FT
HOUSING BORE DIAMETER2.373 INCHES MINIMUM AND 2.375 INCHES MAXIMUM IN
CASE STYLESQUARE
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
SEALING ELEMENT STYLEANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
50058Interchangeable
interchangeable cross-reference
interchangeable
50058-0Interchangeable
interchangeable cross-reference
interchangeable
RC20GF273JInterchangeable
interchangeable cross-reference
interchangeable
109074Interchangeable
interchangeable cross-reference
interchangeable
263-818-200Interchangeable
interchangeable cross-reference
interchangeable
72-6970-014Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy R1044-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R1044-14?
R1044-14 is a SEAL,PLAIN ENCASED.
What parts can replace R1044-14?
There are 23 known substitutes for R1044-14: 50058, 50058-0, RC20GF273J and 20 more. Substitute compatibility should be verified for your specific system.
Is R1044-14 still available?
R1044-14 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R1044-14