PartsTable
Technical Data Sheet
PartsTable / COMPONENT / R10405P12
R10405P12 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.206 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.060 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-350-8344, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R10405P12
NSN: 5340-01-350-8344
FSC: 5340
CAGE: 16331 — LOCKHEED MARTIN CORPORATION DIV ROTARY AND MISSION SYSTEMS (USA)
SPECIFICATIONS
diameter0.206 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON OVERALL
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.060 INCHES NOMINAL IN
loop_inside_diameter0.875 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.067 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.840 INCHES NOMINAL IN
NSN5340-01-350-8344
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: R10405P12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON OVERALL
•
STYLE DESIGNATOR: SINGLE LOOP
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
LOOP INSIDE DIAMETER: 0.875 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.840 INCHES NOMINAL IN
•
DIAMETER: 0.206 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON OVERALL
STYLE DESIGNATORSINGLE LOOP
TONGUE HOLE TYPEROUND, UNTHREADED
LOOP INSIDE DIAMETER0.875 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.840 INCHES NOMINAL IN
DIAMETER0.206 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.067 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
3334Upgraded Successor
successor cross-reference
successor
334Upgraded Successor
successor cross-reference
successor
NPC-14Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy R10405P12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R10405P12?
R10405P12 is a CLAMP,LOOP.
What parts can replace R10405P12?
There are 3 known substitutes for R10405P12: 3334, 334, NPC-14. Substitute compatibility should be verified for your specific system.
What is the NSN for R10405P12?
R10405P12 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-350-8344. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R10405P12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026