R1012HX7DF100-11 — BEARING,BALL,DUPLEX

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

R1012HX7DF100-11: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE RETAINER, bore_diameter: 0.3750 INCHES NOMINAL IN, overall_width: 0.3125 INCHES NOMINAL IN, load_direction: ANGULAR, surface_finish: GROUND, style_designator: COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-216-8337, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

R1012HX7DF100-11

NSN: 3110-00-216-8337
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 70854 — SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION (USA)

SPECIFICATIONS

material	PLASTIC POLYTETRAFLUOROETHYLENE RETAINER
bore_diameter	0.3750 INCHES NOMINAL IN
overall_width	0.3125 INCHES NOMINAL IN
load_direction	ANGULAR
surface_finish	GROUND
style_designator	COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
bearing_preload_rating	10.0 POUNDS NOMINAL LBS
overall_outside_diameter	0.6250 INCHES NOMINAL IN
standard_tolerance_designation	ABEC NO.5
material_document_and_classification	UNABLE TO DECODE
lubrication_material_document_and_classification	MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
NSN	3110-00-216-8337

COMPONENT DIAGRAM

KEY FEATURES

•

BEARING PRELOAD RATING: 10.0 POUNDS NOMINAL LBS

•

SURFACE FINISH: GROUND

•

STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING

•

MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE

•

OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL IN

•

LOAD DIRECTION: ANGULAR

TECHNICAL CHARACTERISTICS

BEARING PRELOAD RATING	10.0 POUNDS NOMINAL LBS
SURFACE FINISH	GROUND
STYLE DESIGNATOR	COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
MATERIAL DOCUMENT AND CLASSIFICATION	UNABLE TO DECODE
OVERALL WIDTH	0.3125 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER	0.6250 INCHES NOMINAL IN
LOAD DIRECTION	ANGULAR
SPECIAL FEATURES	10 GM CM STARTING TORQUE WITH 8 TO 12 LB PRELOAD,2 DROPS OF SPECIFIED LUBRICANT IN EACH BEARING USING A NO. 26 HYPODERMIC NEEDLE,BORE AND OD OF EACH PR OF BEARINGS MATCHED WITHIN 0.000050 IN. OF EACH OTHER,EACH PR SHALL BE CODED IN 0.000050 IN. INCREMENTS PER AFBMA SECTION 12,TORRIDS AROUND ALTERNATE BALLS LOOSELY FIT LBS
STANDARD TOLERANCE DESIGNATION	ABEC NO.5
BORE DIAMETER	0.3750 INCHES NOMINAL IN

OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722

SUBSTITUTES & CROSS-REFERENCES 1

901796-1CReference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy R1012HX7DF100-11?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is R1012HX7DF100-11?

R1012HX7DF100-11 is a BEARING,BALL,DUPLEX.

What parts can replace R1012HX7DF100-11?

There is 1 known substitute for R1012HX7DF100-11: 901796-1C. Substitute compatibility should be verified for your specific system.

What is the NSN for R1012HX7DF100-11?

R1012HX7DF100-11 is cataloged in the U.S. Government catalog under NSN 3110-00-216-8337. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

R1012HX7DF100-11 — BEARING,BALL,DUPLEX

Request a Quote — R1012HX7DF100-11