PartsTable
Technical Data Sheet
PartsTable / MRO / R101
R101 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include food_type: STRAWBERRY, lens_type: CYLINDRICAL SINGLE LIGHT FIRST POSITION HORIZONTAL, lens_color: COLORLESS SINGLE LIGHT FIRST POSITION HORIZONTAL, body_length: 1.750 INCHES NOMINAL IN, food_quality: GRADE A, FANCY, body_diameter: 0.312 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-025-2102, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ R101
NSN: 5340-00-025-2102
FSC: 5340
CAGE: 80477 — ADAMS RITE AEROSPACE, INC (USA)
SPECIFICATIONS
food_typeSTRAWBERRY
lens_typeCYLINDRICAL SINGLE LIGHT FIRST POSITION HORIZONTAL
lens_colorCOLORLESS SINGLE LIGHT FIRST POSITION HORIZONTAL
body_length1.750 INCHES NOMINAL IN
food_qualityGRADE A, FANCY
body_diameter0.312 INCHES NOMINAL IN
lens_quantity1
physical_formCRUSHED
terminal_typeTAB W/WIRE LEAD
inclosure_typeENCAPSULATED
overall_length2.690 INCHES MAXIMUM IN
terminal_width0.281 INCHES NOMINAL IN
NSN5340-00-025-2102
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: R101 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: ZINC,1.370 IN. DIA 0.750 IN. THK; 2 MOUNTING SCREWS 8-32 UNC INCLUDED IN
TECHNICAL CHARACTERISTICS (FLIS)
GENERAL CHARACTERISTICS ITEM DESCRIPTIONZINC,1.370 IN. DIA 0.750 IN. THK; 2 MOUNTING SCREWS 8-32 UNC INCLUDED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
101Upgraded Successor
successor cross-reference
successor
E-Z SCRUBUpgraded Successor
successor cross-reference
successor
8168588Upgraded Successor
successor cross-reference
successor
JAY CUSHIONUpgraded Successor
successor cross-reference
successor
F93D067Upgraded Successor
successor cross-reference
successor
93-4-16-112 DEUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy R101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R101?
R101 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace R101?
There are 18 known substitutes for R101: 101, E-Z SCRUB, 8168588 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for R101?
R101 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-025-2102. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R101

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026