PartsTable / O-RING / R01-232
R01-232
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -30.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM, outside_diameter: 2.980 INCHES MINIMUM AND 3.044 INCHES MAXIMUM IN, center_hole_diameter: 2.719 INCHES MINIMUM AND 2.749 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-165-1950, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
R01-232
NSN: 5331-00-165-1950 FSC: 5331 — O-RINGCAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER FLUOROCARBON CLASS FPM temp_rating -30.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF hardness_rating 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM outside_diameter 2.980 INCHES MINIMUM AND 3.044 INCHES MAXIMUM IN center_hole_diameter 2.719 INCHES MINIMUM AND 2.749 INCHES MAXIMUM IN elongation_percentage 125 MAXIMUM cross-sectional_height 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN NSN 5331-00-165-1950
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: R01-232
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL: RUBBER FLUOROCARBON CLASS FPM
• CENTER HOLE DIAMETER: 2.710 INCHES MINIMUM AND 2.758 INCHES MAXIMUM IN
• TEMP RATING: -30.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
• HARDNESS RATING: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
• CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
• OUTSIDE DIAMETER: 2.980 INCHES MINIMUM AND 3.044 INCHES MAXIMUM IN
• ELONGATION PERCENTAGE: 125 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL RUBBER FLUOROCARBON CLASS FPM CENTER HOLE DIAMETER 2.710 INCHES MINIMUM AND 2.758 INCHES MAXIMUM IN TEMP RATING -30.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF HARDNESS RATING 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM CROSS-SECTIONAL HEIGHT 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN OUTSIDE DIAMETER 2.980 INCHES MINIMUM AND 3.044 INCHES MAXIMUM IN ELONGATION PERCENTAGE 125 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
27402 Interchangeable interchangeable cross-reference
interchangeable
SX1555 Interchangeable interchangeable cross-reference
interchangeable
7994263 Interchangeable interchangeable cross-reference
interchangeable
RE28AA1161G Interchangeable interchangeable cross-reference
interchangeable
28001 Interchangeable interchangeable cross-reference
interchangeable
5682-14 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy R01-232?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R01-232?
R01-232 is a O-RING.
What parts can replace R01-232?
There are 32 known substitutes for R01-232: 27402, SX1555, 7994263 and 29 more. Substitute compatibility should be verified for your specific system.
Is R01-232 still available?
R01-232 is currently cancelled.
Request a Quote — R01-232