PartsTable
Technical Data Sheet
PartsTable / O-RING / R00170-040-S3304
R00170-040-S3304 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, center_hole_diameter: 0.165 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN, cross-sectional_height: 0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-312-2635, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R00170-040-S3304
NSN: 5331-01-312-2635
FSC: 5331 — O-RING
CAGE: 62351 — APPLE RUBBER PRODUCTS, INC. DBA APPLE RUBBER PRODUCTS INC (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
center_hole_diameter0.165 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
cross-sectional_height0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
NSN5331-01-312-2635
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: R00170-040-S3304 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.165 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.165 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
ST737BInterchangeable
interchangeable cross-reference
interchangeable
252727Interchangeable
interchangeable cross-reference
interchangeable
12Z7113-67Interchangeable
interchangeable cross-reference
interchangeable
IM-4 0.58UH 2PCTInterchangeable
interchangeable cross-reference
interchangeable
9100-3318Interchangeable
interchangeable cross-reference
interchangeable
30114-9GInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy R00170-040-S3304?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R00170-040-S3304?
R00170-040-S3304 is a O-RING.
What parts can replace R00170-040-S3304?
There are 10 known substitutes for R00170-040-S3304: ST737B, 252727, 12Z7113-67 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for R00170-040-S3304?
R00170-040-S3304 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-312-2635. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R00170-040-S3304

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026